Ceramic engineering
≈ 17 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Si 3 N 4 Ceramic engineering is the science of creating objects from inorganic, non-metallic materials. This is done using either heat or precipitation reactions on high-purity chemical solutions at lower temperatures. The term includes the purification of raw materials, the study and production of chemical compounds, their formation into components, and the study of their structure, composition, and properties. Ceramic materials may have a crystalline or partly crystalline structure, with long-range order on atomic scale. Glass-ceramics may have an amorphous or glassy structure. They can be formed from a molten mass that solidifies on cooling or chemically synthesized at low temperatures using methods such as hydrothermal synthesis. Ceramic materials are used in the fields of materials engineering, electrical engineering, chemical engineering and mechanical engineering. Ceramics are heat resistant, so they can be used for tasks in which materials like metal and polymers are unsuitable.
Si 3 N 4 ]] Ceramic engineering is the science of creating objects from inorganic, non-metallic materials. This is done using either heat or precipitation reactions on high-purity chemical solutions at lower temperatures. The term includes the purification of raw materials, the study and production of chemical compounds, their formation into components, and the study of their structure, composition, and properties. Ceramic materials may have a crystalline or partly crystalline structure, with long-range order on atomic scale. Glass-ceramics may have an amorphous or glassy structure. They can be formed from a molten mass that solidifies on cooling or chemically synthesized at low temperatures using methods such as hydrothermal synthesis. Ceramic materials are used in the fields of materials engineering, electrical engineering, chemical engineering and mechanical engineering. Ceramics are heat resistant, so they can be used for tasks in which materials like metal and polymers are unsuitable.
Processing steps
The traditional ceramic process generally follows this sequence: Milling → Batching → Mixing → Forming → Drying → Firing → Assembly. ]] Milling is the process by which materials are reduced from a large size to a smaller size. Milling may involve breaking up cemented material (in which case individual particles retain their shape) or pulverization (which involves grinding the particles themselves to a smaller size). Milling is generally done by mechanical means, including attrition (which is particle-to-particle collision that results in agglomerate break up or particle shearing), compression (which applies a forces that results in fracturing), and impact (which employs a milling medium or the particles themselves to cause fracturing). Attrition milling equipment includes the wet scrubber (also called the planetary mill or wet attrition mill), which has paddles in water creating vortexes in which the material collides and break up. Compression mills include the jaw crusher, roller crusher and cone crusher. Impact mills include the ball mill, which has media that tumble and fracture the material, or the ResonantAcoustic mixer. Shaft impactors cause particle-to particle attrition and compression. Batching is the process of weighing the oxides according to recipes, and preparing them for mixing and drying. Mixing occurs after batching and is performed with various machines, such as dry-mixing ribbon mixers, ResonantAcoustic mixers, Mueller mixers, and pug mills. Wet mixing generally involves the same equipment. Forming is making the mixed material into shapes, ranging from toilet bowls to spark plug insulators. Forming can involve: (1) Extrusion, such as extruding "slugs" to make bricks, (2) Pressing to make shaped parts, (3) Slip casting, as in making toilet bowls, wash basins and ornamentals like ceramic statues. Forming produces a "green" part, ready for drying. Green parts are soft, pliable, and over time will lose shape. Handling the green product will change its shape. For example, a green brick can be "squeezed", and after squeezing it will stay that way. Drying is removing the water or binder from the formed material. Spray drying is widely used to prepare powder for pressing operations. Other dryers are tunnel dryers and periodic dryers. Controlled heat is applied in this two-stage process. First, heat removes water. This step needs careful control, as rapid heating causes cracks and surface defects. The dried part is smaller than the green part, and is brittle, necessitating careful handling, since a small impact will cause crumbling and breaking. Sintering is where the dried parts pass through a controlled heating process, and the oxides are chemically changed to cause bonding and densification. The fired part will be smaller than the dried part.
Forming methods
Ceramic forming techniques include throwing, slipcasting, tape casting, freeze-casting, injection molding, dry pressing, isostatic pressing, hot isostatic pressing (HIP), 3D printing and others. Methods for forming ceramic powders into complex shapes are desirable in many areas of technology. Such methods are required for producing advanced, high-temperature structural parts such as heat engine components and turbines. Materials other than ceramics which are used in these processes may include: wood, metal, water, plaster and epoxy—most of which will be eliminated upon firing. A ceramic-filled epoxy , such as Martyte, is sometimes used to protect structural steel under conditions of rocket exhaust impingement. These forming techniques yield tools and other components with dimensional stability, surface quality, high (near theoretical) density and microstructural uniformity. The increasing use and diversity of specialty forms of ceramics adds to the diversity of process technologies to be used. Thus, reinforcing fibers and filaments are mainly made by polymer, sol-gel, or CVD processes, but melt processing also has applicability. The most widely used specialty form is layered structures, with tape casting for electronic substrates and packages being pre-eminent. Photo-lithography is of increasing interest for precise patterning of conductors and other components for such packaging. Tape casting or forming processes are also of increasing interest for other applications, ranging from open structures such as fuel cells to ceramic composites. The other major layer structure is coating, where thermal spraying is important, but chemical and physical vapor deposition and chemical (e.g., sol-gel and polymer pyrolysis) methods are all seeing increased use. Besides open structures from formed tape, extruded structures, such as honeycomb catalyst supports, and highly porous structures, including various foams, for example, reticulated foam, are of increasing use. Densification of consolidated powder bodies continues to be achieved predominantly by (pressureless) sintering. However, the use of pressure sintering by hot pressing is increasing, especially for non-oxides and parts of simple shapes where higher quality (mainly microstructural homogeneity) is needed, and larger size or multiple parts per pressing can be an advantage.
Strength of ceramics
A material's strength is dependent on its microstructure, which can be altered by the engineering processes to which it is subjected. The variety of strengthening mechanisms that alter the strength of a material include the mechanism of grain boundary strengthening. Thus, although yield strength is maximized with decreasing grain size, ultimately, very small grain sizes make the material brittle. Considered in tandem with the fact that the yield strength is the parameter that predicts plastic deformation in the material, one can make informed decisions on how to increase the strength of a material depending on its microstructural properties and the desired end effect. The relation between yield stress and grain size is described mathematically by the Hall-Petch equation which is \sigma_y = \sigma_0 + {k_y \over \sqrt {d}} where k y is the strengthening coefficient (a constant unique to each material), σ o is a materials constant for the starting stress for dislocation movement (or the resistance of the lattice to dislocation motion), d is the grain diameter, and σ y is the yield stress. Theoretically, a material could be made infinitely strong if the grains are made infinitely small. This is, unfortunately, impossible because the lower limit of grain size is a single unit cell of the material. Even then, if the grains of a material are the size of a single unit cell, then the material is in fact amorphous, not crystalline, since there is no long range order, and dislocations cannot be defined in an amorphous material. It has been observed experimentally that the microstructure with the highest yield strength is a grain size of about 10 nanometers, because grains smaller than this undergo another yielding mechanism called grain boundary sliding. Producing engineering materials with this ideal grain size is difficult because of the limitations of initial particle sizes inherent to nanomaterials and nanotechnology.
Ceramic composites
]] These typically comprise two ceramic constituents: a continuous matrix, and a dispersed phase of ceramic particles, whiskers, or short (chopped) or continuous ceramic fibers. The challenge, as in wet chemical processing, is to obtain a uniform or homogeneous distribution of the dispersed particle or fiber phase. Consider first the processing of particulate composites. The particulate phase of greatest interest is tetragonal zirconia because of the toughening that can be achieved from the phase transformation from the metastable tetragonal to the monoclinic crystalline phase, aka transformation toughening. There is also interest in dispersion of hard, non-oxide phases such as silicon carbide, titanium diboride, titanium carbide, boron, carbon and especially oxide matrices like alumina and mullite. There is also interest too incorporating other ceramic particulates, especially those of highly anisotropic thermal expansion, including aluminum oxide, titanium dioxide, graphite, and boron nitride. single crystal]] In processing particulate composites, the issue is not only homogeneity of the size and spatial distribution of the dispersed and matrix phases, but also control of the matrix grain size. However, there is some built-in self-control due to inhibition of matrix grain growth by the dispersed phase. Particulate composites, though generally offer increased resistance to damage, failure, or both, are still quite sensitive to inhomogeneities of composition as well as other processing defects such as pores. Thus, they need good processing to be effective. Particulate composites have been made on a commercial basis by mixing powders of the two constituents. Although this approach is inherently limited in the homogeneity that can be achieved, it is the most readily adaptable for existing ceramic production technology. However, other approaches are of interest. milling bits]] From the technological standpoint, a desirable approach to fabricating particulate composites is to coat the matrix or its precursor onto fine particles of the dispersed phase with good control of the starting dispersed particle size and the resultant matrix coating thickness. It should, in principle, be possible to achieve perfect homogeneity of distribution and thereby optimize composite performance. This can also have other ramifications, such as allowing more useful composite performance to be achieved in a body having porosity, which might be desired for other factors, such as limiting thermal conductivity. There are also some opportunities to utilize melt processing for fabrication of ceramic, particulate, whisker and short-fiber, and continuous-fiber composites. Both particulate and whisker composites are conceivable by solid-state precipitation after solidification of the melt. This can also be obtained in some cases by sintering, as for precipitation-toughened, partially stabilized zirconia. Similarly, it is known that one can directionally solidify ceramic eutectic mixtures and hence obtain uniaxially aligned fiber composites. Such composite processing has typically been limited to very simple shapes and thus suffers from serious economic problems due to high machining costs. There is a possibility for melt casting to be used for many of these approaches. Potentially even more desirable is using melt-derived particles. In this method, quenching is done in a solid solution or in a fine eutectic structure, in which the particles are then processed by more typical ceramic powder processing methods into a useful body. There have also been preliminary attempts to use melt spraying as a means of forming composites by introducing the dispersed particulate, whisker, or fiber phase in conjunction with the melt spraying process. Other methods besides melt infiltration to manufacture ceramic composites with long fiber reinforcement are chemical vapor infiltration and the infiltration of fiber preforms with organic precursor, which after pyrolysis yield an amorphous ceramic matrix, initially with a low density. With repeated cycles of infiltration and pyrolysis one of those types of ceramic matrix composites is produced. Chemical vapor infiltration is used to manufacture carbon/carbon and silicon carbide reinforced with carbon or silicon carbide fibers. Besides many process improvements, the first of two major needs for fiber composites is lower fiber costs. The second major need is fiber compositions or coatings, or composite processing, to reduce degradation that results from high-temperature composite exposure under oxidizing conditions.
Applications
The products of technical ceramics include tiles used in the Space Shuttle program, gas burner nozzles, ballistic protection, nuclear fuel uranium oxide pellets, bio-medical implants, jet engine turbine blades, and missile nose cones. Its products are often made from materials other than clay, chosen for their particular physical properties. These may be classified as follows: Oxides: silica, alumina, zirconia Non-oxides: carbides, borides, nitrides, silicides Composites: particulate or whisker reinforced matrices, combinations of oxides and non-oxides (e.g. polymers). Ceramics can be used in many technological industries. One application is the ceramic tiles on NASA's Space Shuttle, used to protect it and the future supersonic space planes from the searing heat of re-entry into the Earth's atmosphere. They are also used widely in electronics and optics. In addition to the applications listed here, ceramics are also used as a coating in various engineering cases. An example would be a ceramic bearing coating over a titanium frame used for an aircraft. Recently the field has come to include the studies of single crystals or glass fibers, in addition to traditional polycrystalline materials, and the applications of these have been overlapping and changing rapidly.
Biomedical
hip prosthesis, with a ceramic head and polyethylene acetabular cup.]]Ceramic structures in biomedical applications have been preferred due to their non-metal properties and their mechanical strength which is necessary for many weight bearing implementations in critical locations. However, manufacturing of ceramic parts must be exact in order to reduce wear of prosthetic parts over long periods of use. Artificial bone: While all tissues do recover in due time, hard tissue like bone can take an extensive time to self-repair. Through bone grafting, a porous ceramic sample (CO3Ap) acts as a bone graft to encourage healthy bone repair. An interconnected porous ceramic structure is ideal for encouraging nutrient exchange, cell migration, fluid flow, and vascularization. But these structures do come with less mechanical strength due to their porosity and are difficult to produce. Dentistry applications: Dental implants and fillings use ceramic materials due to their similar properties to bone and their mechanical strength. Ceramic implants are more durable in maximizing stiffness and withstanding mastication loads (chewing force). Biodegradable splints: Reinforcing bones recovering from osteoporosis and HIV–positive patients with a diagnosis of osteonecrosis. There is currently no cure for HIV and other immunological disorders which creates increasing chronic conditions that can only be treated. Many cases of Osteonecrosis of the femoral head have led to ceramic replacements of both joints. Portable oxygen supply: Via the use of ceramic membranes and the power source from a battery, using two Joule heated ceramic membranes, the oxygen pump can deliver concentrated oxygen to mobile patients. This portable device does not require constant heating and can deliver constant 20 ml cm−2 min−1 oxygen in non-extreme conditions. Implant material
Automotive
Automotive uses of ceramics are used for optimization of mechanical structures within automotive engines and are used for their insulating and are resistant to the rapid combustions occurring in engines. Turbocharger: made of silicon nitride. Lag is significantly reduced in silicon nitride turbochargers because they are lighter than the traditional Ni-based superalloys. Also, the time taken to reach 10,000 rpm is 36% shorter for the ceramic rotor which can lead to its preference over traditional Ni-based turbochargers. Exhaust heat management: an efficient engine has a relatively high thermal efficiency to ensure fuel is being used efficiently. Earlier car engines started using ceramic gas turbine engines, however there were challenges with thermal deformation, insufficient lubricating of rotating parts, and low strength of ceramic materials at high temperatures. Heat shield Exhaust heat management
Electronics
Capacitors Integrated circuit packages Transducers Insulators
Biomaterials
at right. ]] Silicification is quite common in the biological world and occurs in bacteria, single-celled organisms, plants, and animals (invertebrates and vertebrates). Crystalline minerals formed in such environment often show exceptional physical properties (e.g. strength, hardness, fracture toughness) and tend to form hierarchical structures that exhibit microstructural order over a range of length or spatial scales. The minerals are crystallized from an environment that is undersaturated with respect to silicon, and under conditions of neutral pH and low temperature (0–40 °C). Formation of the mineral may occur either within or outside of the cell wall of an organism, and specific biochemical reactions for mineral deposition exist that include lipids, proteins and carbohydrates. Most natural (or biological) materials are complex composites whose mechanical properties are often outstanding, considering the weak constituents from which they are assembled. These complex structures, which have risen from hundreds of million years of evolution, are inspiring the design of novel materials with exceptional physical properties for high performance in adverse conditions. Their defining characteristics such as hierarchy, multifunctionality, and the capacity for self-healing, are currently being investigated. The basic building blocks begin with the 20 amino acids and proceed to polypeptides, polysaccharides, and polypeptides–saccharides. These, in turn, compose the basic proteins, which are the primary constituents of the 'soft tissues' common to most biominerals. With well over 1,000 proteins possible, current research emphasizes the use of collagen, chitin, keratin, and elastin. The 'hard' phases are often strengthened by crystalline minerals, which nucleate and grow in a bio-mediated environment that determines the size, shape and distribution of individual crystals. The most important mineral phases have been identified as hydroxyapatite, silica, and aragonite. Using the classification of Wegst and Ashby, the principal mechanical characteristics and structures of biological ceramics, polymer composites, elastomers, and cellular materials have been presented. Selected systems in each class are being investigated with emphasis on the relationship between their microstructure over a range of length scales and their mechanical response. Thus, the crystallization of inorganic materials in nature generally occurs at ambient temperature and pressure. Yet the vital organisms through which these minerals form are capable of consistently producing extremely precise and complex structures. Understanding the processes in which living organisms control the growth of crystalline minerals such as silica could lead to significant advances in the field of materials science. shell.]] The mother-of-pearl (or nacre) portion of the abalone shell exhibits the highest mechanical strength and fracture toughness of any non-metallic substance known. The nacre from the shell of the abalone has become one of the more intensively studied biological structures in materials science. Clearly visible in these images are the neatly stacked (or ordered) mineral tiles separated by thin organic sheets along with a macrostructure of larger periodic growth bands which collectively form what scientists are currently referring to as a hierarchical composite structure. (The term hierarchy simply implies that there are a range of structural features which exist over a wide range of length scales). Future developments reside in the synthesis of bio-inspired materials through processing methods and strategies that are characteristic of biological systems. These involve nanoscale self-assembly of the components and the development of hierarchical structures.
See also
References
External links
The American Ceramic Society Ceramic Tile Institute of America
Text derived from https://en.wikipedia.org/w/index.php?oldid=1371744612 under CC BY-SA 4.0; modifications have been made.