Lesson plan
Cerimetry
Cerimetry or cerimetric titration, also known as cerate oximetry, is a method of volumetric chemical analysis developed by Ion Atanasiu. It is a redox titration in which an iron(II)–1,10-phenanthroline complex (ferroin) color change indicates the end point. Ferroin can be reversibly discolored in its oxidized form upon titration with a Ce 4+ solution. The use of cerium(IV) salts as reagents for volumetric analysis was first proposed in the middle of 19th century, but systematic studies did not start until about 70 years later. Standard solutions can be prepared from different Ce 4+ salts, but often cerium sulfate is chosen. Since cerimetry is linked to the Fe 3+ /Fe 2+ redox pair, it can be used for analyses of nonstoichiometric levels that either oxidize Fe 2+ or reduce Fe 3+ . For the case of oxidation, a precise excess of high-purity crystalline Mohr's salt is added upon the oxide digestion in aqueous hydrogen chloride (HCl), while for the case of reduction, an excess of 1 M iron trichloride (FeCl 3 ) is added. In both cases, Fe 2+ ions will be titrated subsequently. Because the Ce 4+ solution is prone to hydrolysis, the titration is done in a strongly HCl-acidic solution into which some phosphoric acid (H 3 PO 4 ) is added to obtain a less colored phosphato complex of Fe 3+ .…
Article summary
Cerimetry or cerimetric titration, also known as cerate oximetry, is a method of volumetric chemical analysis developed by Ion Atanasiu. It is a redox titration in which an iron(II)–1,10-phenanthroline complex (ferroin) color change indicates the end point. Ferroin can be reversibly discolored in its oxidized form upon titration with a Ce 4+ solution. The use of cerium(IV) salts as reagents for volumetric analysis was first proposed in the middle of 19th century, but systematic studies did not start until about 70 years later. Standard solutions can be prepared from different Ce 4+ salts, but often cerium sulfate is chosen. Since cerimetry is linked to the Fe 3+ /Fe 2+ redox pair, it can be used for analyses of nonstoichiometric levels that either oxidize Fe 2+ or reduce Fe 3+ . For the case of oxidation, a precise excess of high-purity crystalline Mohr's salt is added upon the oxide digestion in aqueous hydrogen chloride (HCl), while for the case of reduction, an excess of 1 M iron trichloride (FeCl 3 ) is added. In both cases, Fe 2+ ions will be titrated subsequently. Because the Ce 4+ solution is prone to hydrolysis, the titration is done in a strongly HCl-acidic solution into which some phosphoric acid (H 3 PO 4 ) is added to obtain a less colored phosphato complex of Fe 3+ .…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.