Lesson plan

CFD-DEM model

A CFD-DEM model is suitable for the modeling or simulation of fluid-solids or fluid-particles systems. In a typical CFD-DEM model, the phase motion of discrete solids or particles is obtained by the Discrete Element Method (DEM) which applies Newton's laws of motion to every particle and the flow of continuum fluid is described by the local averaged Navier–Stokes equations that can be solved by the traditional Computational Fluid Dynamics (CFD). The model is first proposed by Tsuji et al. The interactions between the fluid phase and solids phase is better modeled according to Newton's third law. Subsequent developments classified CFD–DEM methods into resolved, semi-resolved, and unresolved coupling approaches according to the grid-to-particle size ratio. In resolved coupling, hydrodynamic forces are obtained by directly resolving the flow around particles using techniques such as the Immersed boundary method (IBM) and the Fictitious domain method (FDM). In contrast, semi-resolved and unresolved approaches rely on empirical or semi-empirical force models to represent fluid–particle interactions. The semi-resolved approach occupies an intermediate regime, employing kernel-based reconstruction techniques to recover local background fields, such as fluid velocity, temperature, and volume fraction, thereby enabling more accurate calculations of interphase momentum and heat transfer.

Back to article

Article summary

A CFD-DEM model is suitable for the modeling or simulation of fluid-solids or fluid-particles systems. In a typical CFD-DEM model, the phase motion of discrete solids or particles is obtained by the Discrete Element Method (DEM) which applies Newton's laws of motion to every particle and the flow of continuum fluid is described by the local averaged Navier–Stokes equations that can be solved by the traditional Computational Fluid Dynamics (CFD). The model is first proposed by Tsuji et al. The interactions between the fluid phase and solids phase is better modeled according to Newton's third law. Subsequent developments classified CFD–DEM methods into resolved, semi-resolved, and unresolved coupling approaches according to the grid-to-particle size ratio. In resolved coupling, hydrodynamic forces are obtained by directly resolving the flow around particles using techniques such as the Immersed boundary method (IBM) and the Fictitious domain method (FDM). In contrast, semi-resolved and unresolved approaches rely on empirical or semi-empirical force models to represent fluid–particle interactions. The semi-resolved approach occupies an intermediate regime, employing kernel-based reconstruction techniques to recover local background fields, such as fluid velocity, temperature, and volume fraction, thereby enabling more accurate calculations of interphase momentum and heat transfer.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.