Lesson plan

CFD-DEM

The CFD-DEM model, or Computational Fluid Dynamics / Discrete Element Method model, is a process used to model or simulate systems combining fluids with solids or particles. In CFD-DEM, the motion of discrete solids or particles phase is obtained by the Discrete Element Method (DEM) which applies Newton's laws of motion to every particle, while the flow of continuum fluid is described by the local averaged Navier–Stokes equations that can be solved using the traditional Computational Fluid Dynamics (CFD) approach. The interactions between the fluid phase and solids phase is modeled by use of Newton's third law. Coupling CFD and DEM methods allows to study Lagrangian statistics by tracking individual particles. According to the grid-to-particle size ratio, CFD–DEM coupling approaches are commonly classified into resolved, semi-resolved, and unresolved methods. In resolved CFD–DEM coupling, the CFD grid size is substantially smaller than the particle diameter. Grid-to-particle size ratios of approximately 0.1–0.125 are typically required to achieve grid-independent results. In this framework, hydrodynamic forces acting on particles are obtained by directly integrating pressure and viscous stresses over particle surfaces. Common numerical techniques include the Immersed boundary method (IBM) and the Fictitious domain method (FDM), among others.…

Back to article

Article summary

The CFD-DEM model, or Computational Fluid Dynamics / Discrete Element Method model, is a process used to model or simulate systems combining fluids with solids or particles. In CFD-DEM, the motion of discrete solids or particles phase is obtained by the Discrete Element Method (DEM) which applies Newton's laws of motion to every particle, while the flow of continuum fluid is described by the local averaged Navier–Stokes equations that can be solved using the traditional Computational Fluid Dynamics (CFD) approach. The interactions between the fluid phase and solids phase is modeled by use of Newton's third law. Coupling CFD and DEM methods allows to study Lagrangian statistics by tracking individual particles. According to the grid-to-particle size ratio, CFD–DEM coupling approaches are commonly classified into resolved, semi-resolved, and unresolved methods. In resolved CFD–DEM coupling, the CFD grid size is substantially smaller than the particle diameter. Grid-to-particle size ratios of approximately 0.1–0.125 are typically required to achieve grid-independent results. In this framework, hydrodynamic forces acting on particles are obtained by directly integrating pressure and viscous stresses over particle surfaces. Common numerical techniques include the Immersed boundary method (IBM) and the Fictitious domain method (FDM), among others.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.