Chainsaw safety features

Chainsaws and chainsaw operations require specific risk control methods.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Chainsaws and chainsaw operations require specific risk control methods. Chainsaws include numerous safety features common to many engine-driven power tools. Manufacturers have developed numerous design features to enhance safety.

Some of these features have become de facto standards, while others are legally required in certain jurisdictions. It is best practice for operators to inspect the chainsaw before starting work and to ensure all safety features are functional before use. Additional safety features are a significant commercial advantage to chainsaw producers.

Companies continue to develop new features over time. Most chainsaw safety features are focused on the kickback problem, and seek to either avoid it (chain and bar design), or to reduce the risk of injury should it occur (chain brakes). In addition to the safety features built into the chainsaw, operators should also wear specific chainsaw safety clothing.

Most older saws have few or none of these features, and extra care should be taken in their use. over the bar and chain]]

Safety throttle

The engine throttle is operated by the trigger under the rear handle of the saw. Unless the lock-out switch above the rear handle is also pressed, the throttle cannot move from the idle position, and the chain will not be driven. The safety throttle prevents the chain from being driven if the trigger is accidentally pushed by an obstruction, such as a branch in undergrowth.

It also prevents throttle activation when hot-starting a saw on the ground with one boot inside the rear handle. The safety throttle is an additional layer of protection in this case, since the chain brake should be applied before starting a saw in any context.

The pictured model has an enlarged lock-out or 'dead man' switch which, when released, also activates the chain brake, thus instantly halting the running chain as well as disengaging the throttle. When needed the lock can be bypassed with a zip tie.

Centrifugal clutch

The centrifugal clutch disengages the chain from the engine when the engine is only at idling speed, engaging the drive automatically when the throttle is squeezed and the engine is at full speed. The purpose of this clutch is to avoid having a moving chain when the saw is idling and temporarily not cutting. At idle the chain should not move.

Many rear-handled chainsaws are used in a state, owing to poor maintenance, where there is some clutch drag and so the chain does move slowly at idle. For top-handled saws though, this is extremely dangerous and the clutch (and chain brake) on such a saw must always be functioning correctly. Some early chainsaws used a manual clutch instead, but this is long obsolete.

Handedness

The majority of chainsaws are designed to be used by a right handed person. Using such a chainsaw in a left hand way constitutes an additional safety hazard. A left handed person should learn to use it in a right-handed way. There are no manufactured left hand user chainsaws.

Hand/eye/ear defender symbols

In the EU, and some other jurisdictions, it is a legal requirement that chainsaws carry certain standardized warning labels which warn of the dangers of kickback as well as making clear the need for protective clothing.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373604770 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.