Lesson plan
Charactron
Charactron was a U.S. registered trademark (number 0585950, 23 February 1954) of Consolidated Vultee Aircraft Corporation (Convair) for its shaped electron beam cathode-ray tube. Charactron CRTs performed functions of both a display device and a read-only memory storing multiple characters and fonts. The similar Typotron was a U.S. registered trademark (23 November 1953) of Hughes Aircraft Corporation for its type of shaped electron beam storage tube with a direct-view bistable storage screen. The Charactron CRT used an electron beam to flood a specially patterned perforated anode that contained the stencil patterns for each of the characters that it could form. The first deflection positioning of the electron beam steered the beam to pass through one of the (typically 64 or 116) characters and symbols that could be formed. The beam, which then had the cross-section of the desired character, was re-centered along the axis of the tube and deflected to the desired position of the screen for display. Alternately, as in the accompanying image, the entire matrix was filled with the electron beam then deflected through a selection aperture to isolate one character.…
Article summary
Charactron was a U.S. registered trademark (number 0585950, 23 February 1954) of Consolidated Vultee Aircraft Corporation (Convair) for its shaped electron beam cathode-ray tube. Charactron CRTs performed functions of both a display device and a read-only memory storing multiple characters and fonts. The similar Typotron was a U.S. registered trademark (23 November 1953) of Hughes Aircraft Corporation for its type of shaped electron beam storage tube with a direct-view bistable storage screen. The Charactron CRT used an electron beam to flood a specially patterned perforated anode that contained the stencil patterns for each of the characters that it could form. The first deflection positioning of the electron beam steered the beam to pass through one of the (typically 64 or 116) characters and symbols that could be formed. The beam, which then had the cross-section of the desired character, was re-centered along the axis of the tube and deflected to the desired position of the screen for display. Alternately, as in the accompanying image, the entire matrix was filled with the electron beam then deflected through a selection aperture to isolate one character.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.