Lesson plan

Circle grid analysis

Circle grid analysis (CGA), also known as circle grid strain analysis, is a method of measuring the strain levels of sheet metal after a part is formed by stamping or drawing. The name itself is a fairly accurate description of the process. Literally, a grid of circles of known diameter is etched to the surface of the sheet metal to be formed. After the part is formed, the circles have been stretched into ellipses. By measuring the longest part of the ellipse (called the “major strain”) and the shortest part of the ellipse (called the “minor strain”), it is possible to determine how close any stamped part is to splitting or fracturing.

Back to article

Article summary

Circle grid analysis (CGA), also known as circle grid strain analysis, is a method of measuring the strain levels of sheet metal after a part is formed by stamping or drawing. The name itself is a fairly accurate description of the process. Literally, a grid of circles of known diameter is etched to the surface of the sheet metal to be formed. After the part is formed, the circles have been stretched into ellipses. By measuring the longest part of the ellipse (called the “major strain”) and the shortest part of the ellipse (called the “minor strain”), it is possible to determine how close any stamped part is to splitting or fracturing.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.