Circuit ID

A circuit ID is a company-specific identifier assigned to a data or voice network connection between two locations.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 6 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A circuit ID is a company-specific identifier assigned to a data or voice network connection between two locations. This connection, often called a circuit, may then be leased to a customer referring to that ID. In this way, the circuit ID is similar to a serial number on any product sold from a retailer to a customer.

Each circuit ID is unique, so a specific customer having many circuit connections sold to them would have many circuit IDs to refer to those connections. As an example of a use of the circuit ID, when a subscriber/customer has an issue (or trouble) with a circuit, they may contact the Controlling Local Exchange Carrier (Controlling LEC) telecommunications provider, identifying the circuit that has the issue by giving the LEC that circuit ID reference.

The LEC would refer to their internal records for this circuit ID to take corrective action on the designated circuit.

Carrier-facility format

For "carrier circuits", CenturyLink uses a format like: AAAAA/BBBBBB/CCCCCCCCCCC/DDDDDDDDDDD Where: A = Prefix: 3–5 Alphanumeric characters. This is a unique identifier. Required.

B = Facility Type: 1–6 Alphanumeric characters. Describes the "type" of facility circuit. Required.

C = CLLI Code for the A-location: 8 or 11 alphanumeric characters. Required. D = CLLI Code for the Z-location: 8 or 11 alphanumeric characters.

Required. Example: HN101/T3U/MPLSMNDT000/GLVYMNORIII The above example circuit ID represents an unframed T3 circuit between two locations in Minnesota with a "serial number" of HN101. Some telecom providers also build a bit of intelligence (or meaning) into this unique prefix information.

For instance, a T3U circuit type that carries a specific type of network traffic might use the HN designation at the beginning followed by a number in the 100-block for another specific purpose, 200-block for yet another purpose, and so on. For more on Carrier Facility formatted circuit IDs using Telcordia's standards, see Common Language Facility Identification.

Serial-number format

For "special circuits", CenturyLink uses a format like: AA/BBCC/DDDDDD/EEE/FFFF/GGG Where: A = Prefix: 1–2 alphanumeric characters. Optional. B = Service Code: 2 Characters.

Required. The type of service this circuit is providing. C = Service Code Modifier: 2 Characters.

Required. Modifies the meaning of the service code, often identifies different billing options. D = Serial Number: 1–6 digits.

Required. E = Suffix: 3 character suffix to the serial number. Optional, but rarely used.

F = Company Code: 2–4 alphabetic characters (eg. NW, MS, PN, CTL, GTEW, NRLD, UDMN, FROT...) Required. Identifies the Controlling LEC.

G = Segment: 1–3 alphanumeric characters. Optional for point-to-point circuits, but usually found with multi-point DS0 circuits.

Examples: 32/HFGS/012345/NW = T3 Circuit controlled by Qwest 73/HCGS/123456/000/CC = T1 Circuit controlled by Consolidated Communications 44/AQDU/987654/000/G3 = HDSL Circuit controlled by G3 Telecom Parts of this circuit ID may also have additional intelligence (or meaning) built in. For instance, the Prefix may or may not be based on the LATA from one end of the circuit or the other.

Telephone-number format

For "telephone based data circuits", CenturyLink uses a format like: AA/BBCC/DDD/EEE/FFFF/GGGGG/HHH Where: A = Prefix: 1-2 alphanumeric characters. Required if it exists. B = Service Code: 2 alphabetic characters.

Required for non-DSL numbered circuits. C = Service Code Modifier: 2 alphabetic characters. Required.

Modifies meaning of the service code, often identifies different billing options. D = NPA: 3 digits. This is a required field.

Numbering plan area code. E = NXX: 3 digits. This is a required field.

Central office (exchange) code. F = Line: 4 digits. This is a required field.

G = Extension: 1-5 alphanumeric characters. Optional. H = Segment: 1–3 alphanumeric characters.

This is a rarely used optional field. Example: 54/UDNV/303/111/5555/99/1 = a circuit serving phone number 303-111-5555, ext.

99, on segment 1 AMS = Amsterdam BS = Bristol DSSD = Düsseldorf FFTM = Frankfurt-am-Main KOB = Copenhagen L = London MDD = Madrid PS = Paris Original CCITT Leased Circuit Types were: Analogue P = Audio circuit (however transmitted over distance) presented as Audio for voice FP = Audio circuit (however transmitted over distance) presented as Audio for Fax modem DP = Audio circuit (however transmitted over distance) presented as Audio for Data modem XP = Audio circuit (however transmitted over distance) presented as Audio and switched by customer for alternate use by Voice or Data modem L – PS P4 was the fourth analogue line between Paris and London normally used for voice transmission at that time. DSSD-L XP2 was the fourth analogue line between Düsseldorf and London alternately used for voice and data at that time.

Digital NP became the Type designator for most correspondent International digital links. BS – MDD NP12 and KOB – PS NP34 would have been typical uses of the scheme for links between Bristol & Madrid and Copenhagen & Paris.

Notes The choice of letters in designating major town and cities could be seen to reflect a short form of the name in the language of the country and also to disambiguate with similarly named locations. København being the Danish home version of Copenhagen attracted KOB as the abbreviation.

FFTO was the designation for Frankfurt-an-der-Oder, where there was the clear need to disambiguate references from FFTM. The serial or the numbered occurrence of a link between two PTOs between 2 cities was usually the next free number in the system, but the CCITT allowed for the re-use of old serial numbers after a period of 6 months.

A customer ordering 3 links could be allocated DP23, DP24 and then DP6 between 2 major cities. (DP6 had been ceased over 6 months earlier).

It can be considered that the serial or last number of the type of correspondent link between two places made the link unique but did lead to problems, for example when a major PTO in one country was setting up links in correspondent relations with more than one PTO in another country. The development was away from correspondent IPC links to a situation where one facilities provider could provide the link over the international part and sometimes as afar as the distant end customer.

This was the result of liberalisation and competition in home and overseas markets. In some cases the facilities provider would carry the link to their PoP in the distant country and then rent a national or local tail from the PTO in that country. That would attract a designation particular to that area and not reflect its international connection significance.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1326866099 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.