Circumference

In geometry, the circumference ( ) is the perimeter of a circle or ellipse.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In geometry, the circumference ( ) is the perimeter of a circle or ellipse. The circumference is the arc length of the circle, as if it were opened up and straightened out to a line segment. More generally, the perimeter is the curve length around any closed figure.

Circumference may also refer to the circle itself, that is, the locus corresponding to the edge of a disk. The is the circumference, or length, of any one of its great circles. \pi = \frac{C}{d}. Or, equivalently, as the ratio of the circumference to twice the radius.

The above formula can be rearranged to solve for the circumference: {C} = \pi \cdot{d} = 2\pi \cdot{r}.\! The ratio of the circle's circumference to its radius is equivalent to 2\pi . This is also the number of radians in one turn.

The use of the mathematical constant is ubiquitous in mathematics, engineering, and science. In Measurement of a Circle written circa 250 BCE, Archimedes showed that this ratio (written as C/d, since he did not use the name ) was greater than 3 but less than 3 by calculating the perimeters of an inscribed and a circumscribed regular polygon of 96 sides.

This method for approximating was used for centuries, obtaining more accuracy by using polygons of larger and larger number of sides. The last such calculation was performed in 1630 by Christoph Grienberger who used polygons with 10 40 sides.

L(\gamma)=\sup\sum_{i=1}^n |\gamma(t_i)-\gamma(t_{i-1})|, where the supremum is taken over all partitions a=t_0 For continuously differentiable curves this length is equal to L(\gamma)=\int_a^b |\gamma'(t)|,dt. Applying this to the circle of radius (r), with parametrization \gamma(t)=(r\cos t,r\sin t),\qquad 0\leq t\leq 2\pi, gives |\gamma'(t)|=r , and hence L(\gamma)=\int_0^{2\pi}r,dt=2\pi r. Thus, in analysis, the formula for circumference follows from a general definition of one-dimensional length rather than from assuming in advance that the circle has a perimeter given by polygonal exhaustion. \frac{x^2}{a^2} + \frac{y^2}{b^2} = 1, is C_{\rm{ellipse}} \sim \pi \sqrt{2\left(a^2 + b^2\right)}.

Some lower and upper bounds on the circumference of the canonical ellipse with a\geq b are: 2\pi b \leq C \leq 2\pi a, \pi (a+b) \leq C \leq 4(a+b), 4\sqrt{a^2+b^2} \leq C \leq \pi \sqrt{2\left(a^2+b^2\right)}. Here the upper bound 2\pi a is the circumference of a circumscribed concentric circle passing through the endpoints of the ellipse's major axis, and the lower bound 4\sqrt{a^2+b^2} is the perimeter of an inscribed rhombus with vertices at the endpoints of the major and minor axes.

The circumference of an ellipse can be expressed exactly in terms of the complete elliptic integral of the second kind. More precisely, C_{\rm{ellipse}} = 4a \int_0^{\pi/2} \sqrt{1 - e^2 \sin^2\theta}\ d\theta, where a is the length of the semi-major axis and e is the eccentricity \sqrt{1 - b^2/a^2}.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1358730949 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.