Clément-Panhard
Clément-Panhard is an automobile designed in 1898 by Arthur Constantin Krebs, manager of Panhard & Levassor co, from his 1896 patent of a car fitted with an electromagnetic gearbox, whose licence was acquired by Émile Levassor.
≈ 5 min read
Clément-Panhard. encyclopegia.org, snapshot enwiki-001345855689. /a/cl-ment-panhard
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Clément-Panhard is an automobile designed in 1898 by Arthur Constantin Krebs, manager of Panhard & Levassor co, from his 1896 patent of a car fitted with an electromagnetic gearbox, whose licence was acquired by Émile Levassor. When Adolphe Clément as chairman of the Board of Directors of Panhard-Levassor and project leader, saw the factory could not meet the production requirements for circa 500 units of that new model, he undertook manufacture under licence at his factory in Levallois-Perret under the name of Voiture Clément-Panhard (VCP).
The model was launched in December 1898 on the first Paris Motor Show where 300 orders were received. Production ran at least until 1902. The 1896 Krebs system car (FR256344, GB189619774A) introduced several new features in the car design.
The three point suspension system generalized (engine and chassis) since we know that three points are enough to determine a plane. To these sides [of the frame of the car] I fix or suspend at three points provided with pivoted joints, the motor mechanism which is thereby placed out of the influence of the deformations to which the frame of the car is liable to be subjected during the motion.
The electromagnetic constant mesh gear box I had imagined this arrangement to avoid the brutal shocks that the gears undergo when changing gear, a solution that seemed barbaric to me. The speed shifting at the steering device For the purpose of operating the electro-magnetic clutch, I employ a commutator arranged preferably under the handle bar and adapted to be operated in such a manner as to establish, according to five different positions, the electrical connections that correspond respectively to: rest; forward movement at low speed; forward movement at medium speed; forward movement at high speed; and movement in the rearward direction.
The damped steering and the rack and pinion steering gear Upon the turntable of the fore-carriage is fixed a toothed sector in which engages a pinion mounted on the upper turntable and whose axle carries a toothed wheel situated in a box connected by two tubes to the box of the car. A second toothed wheel mounted on the steering spindle is connected to the first one by means of a chain passing through these two tubes.
Elastic rods, consisting for example of coiled springs, are substituted for the links of the chain in the straightportions of the said tuges. By this means the chain is always taut and the springs neutralize the vibrations transmitted to the chain by the jolting of the fore-carriage and so prevent the said vibrations from being transmitted to the steering spindle.
The forward (positive) caster angle on the steering axis To ensure the stability of direction by the means of a special arrangement of the fore-carriage, that is to say, to re-establish automatically the parallélism of the two axles of the vehicle when there is no tendency to keep them in any other direction, or after a temporary effort has caused them to diverge from said parallélism; ... The axle of the fore-carriage is situated behind the projection of the axis of the pivot pin in order to ensure the stability of direction above referred to [of a quantity which can vary from 1/7 to 1/8 of the distance which separates the points of contact of the two front wheels with the ground].
The metallic wheel hub system, Levassor to Krebs: You would kindly give us permission to use your wheel hub system for which, since you say it is very good, it might be worth patenting. Aesthetic The car of Commander Krebs, resulting from very personal and new ideas, has a particular and original aspect.
We will add that this aspect is very satisfying and more elegant than any car that we have been allowed to see so far.
Technological analogies between the VCP (1898) and the FORD N (1906)
It should be noted the many similarities in principle between the Clément-Panhard car of 1898 (see above) and the Ford model N of 1906, forerunner of the Ford model T: Intended for the general public; Solid and safe; Generalization of the suspension by 3 points and triangulations; Transverse spring on the front axle, so the VCP waddles as does the Ford T; A quasi-automatic gearbox etc. Also the use of vanadium steel by Ford comes from a Panhard & Levassor racing car that crashed during a race in America. 1901 – "The record for crossing England from the North to the South West, from John O' Groats to Land's End, has just been beaten by M. J. Stirling.
Leaving on July 30 in the morning from John O' Groats, he arrived 59 hours later at Land's End which is 847 miles from the start." 1901 – Automobiles in the Glasgow International Exposition: Stirling Parisian Phaeton 1902 – The Stirling Miniature Brouham, the 1902 Stirling Light Dogcart.
1902 – The Stirling Light Delivery van: "Simple, Reliable, Attractive, Economical, Expeditious." – The Stirling Parisian Phaeton: "Up-to-date, the fashionable light car, can be driven by a Lady". 1902 – The 1902 Stirling Light Dogcart: "Up-to-date, latest improvements". 1902 – "If you value your life ... don't buy an Experimental or untried car."
1904 – Self-propelled vehicles. La Voiturette Krebs from rbmn.free.fr. Clément-Panhard on the web.
The Voiture Clément-Panhard (VCP): complete article
Text derived from https://en.wikipedia.org/w/index.php?oldid=1345855689 under CC BY-SA 4.0; modifications have been made.