Lesson plan

Clock feedthrough

In analog electronics, Clock feedthrough is the result of the coupling between control signals on the analog switch and analog signal passing through the switch. In digital electronics, clock feedthrough is the coupling of the clock signal to the nodes where coupling is not intended. Such coupling happens because of the gate-to-source capacitance, interconnect parasitic capacitance, or because of the substrate coupling. Clock feedthrough is generally considered harmful. Methods to reduce clock feedthrough include: *Slew rate reduction of the clock signal, usually by the resistor in series with the controlled gate. *Reduction of the voltage swing of the clock signal *Reduction of the interconnects parasitic capacitance by rerouting interconnects *Increase of the substrate resistance by the buried N-well insulation, shallow trench isolation, or back-grinding *Use of the differential clocks to spread the clock feedthrough signal across a large bandwidth *Use of the differential signal lines where clock feedthrough appears as common-mode signal

Back to article

Article summary

In analog electronics, Clock feedthrough is the result of the coupling between control signals on the analog switch and analog signal passing through the switch. In digital electronics, clock feedthrough is the coupling of the clock signal to the nodes where coupling is not intended. Such coupling happens because of the gate-to-source capacitance, interconnect parasitic capacitance, or because of the substrate coupling. Clock feedthrough is generally considered harmful. Methods to reduce clock feedthrough include: *Slew rate reduction of the clock signal, usually by the resistor in series with the controlled gate. *Reduction of the voltage swing of the clock signal *Reduction of the interconnects parasitic capacitance by rerouting interconnects *Increase of the substrate resistance by the buried N-well insulation, shallow trench isolation, or back-grinding *Use of the differential clocks to spread the clock feedthrough signal across a large bandwidth *Use of the differential signal lines where clock feedthrough appears as common-mode signal

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.