Lesson plan
Clovis point
Clovis points are the characteristically fluted projectile points associated with the New World Clovis culture, a prehistoric Paleo-American culture. They are present in dense concentrations across much of North America and they are largely restricted to the north of South America. There are slight differences in points found in the Eastern United States sometimes leading them to be called "Clovis-like". Clovis points date to the Early Paleoindian period, with all known points dating from roughly 13,400–12,700 years ago (11,500 to 10,800 C14 years BP). As an example, Clovis remains at the Murry Springs Site date to around 12,900 calendar years ago (10,900 ± 50 C14 years BP). Clovis fluted points are named after the city of Clovis, New Mexico, where examples were first found in 1929 by Ridgely Whiteman. A typical Clovis point is a medium to large lanceolate point with sharp edges, a third of an inch thick, one to two inches wide, and about long. Sides are parallel to convex, and exhibit careful pressure flaking along the blade edge. The broadest area is towards the base which is distinctly concave with concave grooves called "flutes" removed from one or, more commonly, both surfaces of the blade. The lower edges of the blade and base are ground to dull edges for hafting. There is debate about how Clovis points were used.…
Article summary
Clovis points are the characteristically fluted projectile points associated with the New World Clovis culture, a prehistoric Paleo-American culture. They are present in dense concentrations across much of North America and they are largely restricted to the north of South America. There are slight differences in points found in the Eastern United States sometimes leading them to be called "Clovis-like". Clovis points date to the Early Paleoindian period, with all known points dating from roughly 13,400–12,700 years ago (11,500 to 10,800 C14 years BP). As an example, Clovis remains at the Murry Springs Site date to around 12,900 calendar years ago (10,900 ± 50 C14 years BP). Clovis fluted points are named after the city of Clovis, New Mexico, where examples were first found in 1929 by Ridgely Whiteman. A typical Clovis point is a medium to large lanceolate point with sharp edges, a third of an inch thick, one to two inches wide, and about long. Sides are parallel to convex, and exhibit careful pressure flaking along the blade edge. The broadest area is towards the base which is distinctly concave with concave grooves called "flutes" removed from one or, more commonly, both surfaces of the blade. The lower edges of the blade and base are ground to dull edges for hafting. There is debate about how Clovis points were used.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.