clutch

Uses your system voice; voice and rate in settings.

Q194302Snapshot

≈ 5 min read

Names in other languages

  • Portuguêsembraiagem
  • eokluĉilo
  • Englishclutch
  • 中文离合器
  • 简体中文离合器
  • 繁體中文離合器
  • 中文離合器
  • 中文离合器
  • 中文離合器

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A clutch is a mechanical device that allows an output shaft to be disconnected from a rotating input shaft. The clutch's input shaft is typically attached to a motor, while the clutch's output shaft is connected to the mechanism that does the work. In a motor vehicle, the clutch acts as a mechanical linkage between the engine and transmission. By disengaging the clutch, the engine speed (RPM) is no longer determined by the speed of the driven wheels. Another example of clutch usage is in electric drills. The clutch's input shaft is driven by a motor and the output shaft is connected to the drill bit (via several intermediate components). The clutch allows the drill bit to either spin at the same speed as the motor (clutch engaged), spin at a lower speed than the motor (clutch slipping) or remain stationary while the motor is spinning (clutch disengaged).

A clutch is a mechanical device that allows an output shaft to be disconnected from a rotating input shaft. The clutch's input shaft is typically attached to a motor, while the clutch's output shaft is connected to the mechanism that does the work. In a motor vehicle, the clutch acts as a mechanical linkage between the engine and transmission. By disengaging the clutch, the engine speed (RPM) is no longer determined by the speed of the driven wheels. Another example of clutch usage is in electric drills. The clutch's input shaft is driven by a motor and the output shaft is connected to the drill bit (via several intermediate components). The clutch allows the drill bit to either spin at the same speed as the motor (clutch engaged), spin at a lower speed than the motor (clutch slipping) or remain stationary while the motor is spinning (clutch disengaged).

Dry clutch

A dry clutch uses dry friction to transfer power from the input shaft to the output shaft, for example a friction disk presses against a car engine's flywheel by a spring mechanism. The wheels of the vehicle are only powered when the flywheel is in contact with the friction disk. To stop the transfer of power, the friction disk is moved away from the flywheel by means of a lever mechanism. The majority of automotive clutches on manual transmissions are dry clutches. Slippage of a friction clutch (where the clutch is partially engaged but the shafts are rotating at different speeds) is sometimes required, such as when a motor vehicle accelerates from a standstill; however, the slippage should be minimised to avoid increased wear rates. In a pull-type clutch, pressing the pedal pulls the release bearing to disengage the clutch. In a push-type clutch, pressing the pedal pushes the release bearing to disengage the clutch. A multi-plate clutch consists of several friction plates arranged concentrically. In some cases, it is used instead of a larger diameter clutch. Drag racing cars use multi-plate clutches to control the rate of power transfer to the wheels as the vehicle accelerates from a standing start. Some clutch disks include springs designed to change the natural frequency of the clutch disc, in order to reduce NVH within the vehicle. Also, some clutches for manual transmission cars use a clutch delay valve to avoid abrupt engagements of the clutch.

Manual transmissions

Most cars and trucks with a manual transmission use a dry clutch, which is operated by the driver using the left-most pedal. The motion of the pedal is transferred to the clutch using mechanical linkage, hydraulics (master and slave cylinders) or a cable. The clutch is only disengaged at times when the driver is pressing on the clutch pedal, therefore the default state is for the transmission to be connected to the engine. A "neutral" gear position is provided, so that the clutch pedal can be released with the vehicle remaining stationary. The clutch is required for standing starts and in vehicles whose transmissions lack synchronising means to assist in matching the speeds of the engine and transmission during gear changes to avoid gear “crashing,” which can cause serious damage to gear teeth. The clutch is usually mounted directly to the face of the engine's flywheel, as this already provides a convenient large-diameter steel disk that can act as one driving plate of the clutch. Some racing clutches use small multi-plate disk packs that are not part of the flywheel. Both clutch and flywheel are enclosed in a conical bellhousing for the gearbox. The friction material used for the clutch disk varies, with a common material being an organic compound resin with a copper wire facing or a ceramic material.

See also

Clutch control Coupling Freewheel Gear shift Saxomat Torque converter Torque limiter

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377308599 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.