CO stripping

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In electrochemistry, CO stripping is a voltammetry technique in which a monolayer of carbon monoxide ( CO ) already adsorbed on the surface of an electrocatalyst is electrochemically oxidized and thus removed from the surface. A well-known process of this type is CO stripping on Pt/C electrocatalysts in which the electrooxidation peak occurs somewhere between 0.5 and 0.9 V depending on the characteristics and structural properties of the specimen.

How it works

In electrochemistry, CO stripping is a voltammetry technique in which a monolayer of carbon monoxide ( CO ) already adsorbed on the surface of an electrocatalyst is electrochemically oxidized and thus removed from the surface. A well-known process of this type is CO stripping on Pt/C electrocatalysts in which the electrooxidation peak occurs somewhere between 0.5 and 0.9 V depending on the characteristics and structural properties of the specimen. Q_{CO} = \frac{1}{v}\int_{V_0}^{V_1} (I_{CO,des} - I_{base}) dV where: v is the potential scan rate.

V_0 is the onset potential at which CO stripping begins. V_1 is the potential at which the pre-adsorbed carbon monoxide is completely removed. I_{CO,des} is the current measured during the first scan, when CO is stripped from the catalyst surface. I_{base} is the baseline current which accounts for all the other phenomena occurring and it is measured in the next cycles.

The electrochemically active surface area is then calculated by dividing the obtained charge by the theoretical monolayer adsorption charge on a smooth electrode ( \sigma_{m} ) which, for platinum, is assumed equal to 420 \mu C/cm^2_{Pt} : ECSA = \frac{Q_{CO}}{\sigma_{m}} \Theta_{dis} = \frac{2Q_{dis}}{Q_{CO}} where \Theta_{dis} is the ionic species coverage, Q_{dis} is the displacement charge and Q_{CO} is the CO stripping charge.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378598686 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

18 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.