Coal homogenization

Coal homogenization refers to the process of mixing coal to reduce the variance of the product supplied.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Coal homogenization refers to the process of mixing coal to reduce the variance of the product supplied. This homogenization process is performed during the coal stockpiling operation. Although the terms blending and homogenization are often used interchangeably, there are differences, as the definitions show.

The most notable difference is that blending refers to stacking coal from different sources together on one stockpile. The reclaimed heap would then typically have a weighted average output quality of the input sources. In contrast, homogenization focuses on reducing the variance of only one source.

A blending operation will cause some homogenization. E = \sigma_{in} / \sigma_{out} (where σ is the standard deviation). In practice, varying stockpile layer thickness, type of stacking and different reclaiming methods makes the above formulae of little use.

Thus, in practice the homogenization effect E is calculated as follows: E = k \sqrt{n} , k usually varies between 0.5 and 0.7. (where n is the number of layers and k is a constant determined for each stockpiling operation) The different types of stacking will influence k.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1345325882 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.