Cobb–Douglas production function
s s In economics and econometrics, the Cobb–Douglas production function is a particular functional form of the production function, widely used to represent the relationship between the amounts of two or more inputs (particularly physical…
≈ 13 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
s s In economics and econometrics, the Cobb–Douglas production function is a particular functional form of the production function, widely used to represent the relationship between the amounts of two or more inputs (particularly physical labor and capital) and the amount of output that can be produced by those inputs. The Cobb–Douglas form was developed and tested against statistical evidence by Charles Cobb and Paul Douglas between 1927 and 1947; according to Douglas, the functional form itself was developed earlier by Philip Wicksteed.
Death and legacy
Y(L,K)=AL^\alpha K^\beta where: Y is the total production output L is the labor input K is the capital input A is the total factor productivity 0 is the labor elasticity of output 0 is the capital elasticity of output Paul Douglas explained that his first formulation of the Cobb–Douglas production function was developed in 1927; when seeking a functional form to relate estimates he had calculated for workers and capital, he spoke with mathematician and colleague Charles Cobb, who suggested a function of the form Y=AL^{\alpha}K^{1-\alpha} , previously used by Knut Wicksell, Philip Wicksteed, and Léon Walras, although Douglas only acknowledges Wicksteed and Walras for their contributions. Not long after Knut Wicksell's death in 1926, Paul Douglas and Charles Cobb implemented the Cobb–Douglas function in their work covering the subject manner of producer theory for the first time.
Estimating this using least squares, he obtained a result for the exponent of labor of 0.75—which was subsequently confirmed by the National Bureau of Economic Research to be 0.741. Later work in the 1940s prompted them to allow for the exponents on L and K to vary, resulting in estimates that subsequently proved to be very close to improved measure of productivity developed at that time.
A major criticism at the time was that estimates of the production function, although seemingly accurate, were based on such sparse data that it was hard to give them much credibility. Douglas remarked "I must admit I was discouraged by this criticism and thought of giving up the effort, but there was something which told me I should hold on."
The breakthrough came in using US census data, which was cross-sectional and provided a large number of observations. Douglas presented the results of these findings, along with those for other countries, at his 1947 address as president of the American Economic Association.
Shortly afterwards, Douglas went into politics and was stricken by ill health, resulting in little further development on his side. However, two decades later, his production function was widely used, being adopted by economists such as Paul Samuelson and Robert Solow.
Career
The Cobb–Douglas production function is especially notable for being the first time an aggregate or economy-wide production function had been developed, estimated, and then presented to the profession for analysis; it marked a landmark change in how economists approached macroeconomics from a microeconomics perspective. \dfrac{\partial Y/Y}{\partial{L}/L} = \alpha \dfrac{\partial Y/Y}{\partial{K}/K} = \beta {{Hidden| Proof| \dfrac{\partial Y/Y}{\partial{L}/L} = \dfrac{\partial Y}{\partial L} \dfrac{L}{Y} = \alpha A L^{\alpha-1} K^\beta \dfrac{L}{Y} = \alpha \dfrac{A L^\alpha K^\beta}{L} \dfrac{L}{Y} = \alpha \dfrac{Y}{L} \dfrac{L}{Y} = \alpha A similar proof holds for capital. }} The marginal product of labor is MPL=\frac{\partial Y}{\partial L}=\alpha\frac{Y}{L}>0 . The marginal product of capital is MPK=\frac{\partial Y}{\partial K}=\beta\frac{Y}{K}>0 .
That is, increasing labor always leads to an increase in output, increasing capital always leads to an increase in output, and increasing the total factor productivity A increases both the marginal product of labor and the marginal product of capital. \frac{\partial MPL}{\partial L} = \frac{\partial^2 Y}{\partial L^2} \frac{\partial MPK}{\partial K} = \frac{\partial^2 Y}{\partial K^2} {{Hidden| Proof| Taking the derivative of the marginal product of labor with respect to labor (i.e., taking the second derivative of the production function with respect to labor), gives: \frac{\partial MPL}{\partial L} = \frac{\partial^2 Y}{\partial L^2} = \frac{\partial}{\partial L} ( A L^{\alpha-1} \alpha K^\beta) = A L^{\alpha-2} \alpha (\alpha-1) K^\beta = \alpha (\alpha-1) A K^\beta \frac{L^\alpha}{L^2} = \alpha (\alpha-1) \frac{Y}{L^2} Because \alpha , then \alpha-1 and therefore \dfrac{\partial MPL}{\partial L} . Another way to see why the law of diminishing returns is satisfied is by writing the marginal product of labor as: MPL=\alpha A L^{\alpha-1} K^\beta = \frac{\alpha A K^\beta}{L^{1-\alpha}} .
Because 0 it follows that the marginal product of labor shrinks as the input of labor is increased. }} MRTS(L,K) = \dfrac{MPL}{MPK} = \dfrac{\alpha}{\beta} \dfrac{K}{L} {{Hidden| Proof| The isoquant for a fixed total production output \bar{Y} is given by \bar{Y}=AL^\alpha K^\beta which can be rewritten as K=\bar{Y}^{1/\beta}A^{-1/\beta}L^{-\alpha/\beta} With labor on the x-axis and capital on the y-axis the slope of the isoquant becomes: \dfrac{dK}{dL}=\dfrac{d(\bar{Y}^{1/\beta}A^{-1/\beta}L^{-\alpha/\beta})}{dL}=\bar{Y}^{1/\beta}A^{-1/\beta} \cdot \left(-\dfrac{\alpha}{\beta}\right) \cdot L^{(-\alpha/\beta)-1}=\left(-\dfrac{\alpha}{\beta}\right) \bar{Y}^{1/\beta}A^{-1/\beta}L^{-\alpha/\beta} \cdot \frac{1}{L} =-\dfrac {\alpha K}{\beta L} MRTS(L, K)=\left| \frac{dK}{dL} \right|= \left| -\frac{\alpha K}{\beta L} \right|=\frac{\alpha K}{\beta L} As \alpha , \beta , L and K are all positive numbers and the marginal rate of technical substitution is the absolute value of the slope of the isoquant. The marginal products of labor and capital are MPL=\alpha \dfrac {Y} {L} and MPK=\alpha \dfrac {Y} {K} and from this it follows that: \dfrac{MPL}{MPK} =\dfrac {\alpha Y/L} {\beta Y/K}=\dfrac {\alpha YK} {\beta YL}=\dfrac {\alpha K} {\beta L}=MRTS(L,K) }} \sigma_{LK} = \dfrac{d\ln(\frac{K}{L})}{d\ln(MRTS)} = \dfrac{d\ln(MRTS\frac{\beta}{\alpha})}{d\ln(MRTS)} = \dfrac{\dfrac{d\ln(MRTS\frac{\beta}{\alpha})}{dMRTS}}{\dfrac{d\ln(MRTS)}{dMRTS}} = \dfrac{1}{MRTS \frac{\beta}{\alpha}} \cdot \frac{\beta}{\alpha} \cdot MRTS = 1 }} If \alpha+\beta=1 , then returns to scale are constant, meaning that an increase of labor and capital by a factor x will lead to an increase in production of the same factor x , that is Y(xL,xK)=xY(L,K) . If \alpha+\beta , then returns to scale are decreasing, meaning that an increase of labor and capital by a factor x will lead to an increase in production by a factor smaller than that of x , that is Y(xL,xK) .
If \alpha+\beta>1 , then returns to scale are increasing, meaning that an increase in labor and capital by a factor x will lead to an increase in production by a factor greater than that of x , that is, Y(xL,xK)>xY(L,K) . Under constant returns to scale, \beta=1-\alpha and Y=L\cdot MPL + K\cdot MPK . In a perfect competition the marginal product of a production factor equals its price.
Therefore, MPL=w and MPK=r where w is the wage rate and r is the price of capital, the real interest rate. The total production can be written as follows: Y=L\cdot w + K\cdot r . That is, the value of production is divided between remuneration for labor and remuneration for capital. f(x)=A \prod_{i=1}^n x_i^{\lambda_i}, \qquad x = (x_1, \ldots, x_n). where A is an efficiency parameter n is the total number of input variables (goods) are the (non-negative) quantities of good consumed, produced, etc. \lambda_i is an elasticity parameter for good i In a 1974 article, economist Anwar Shaikh demonstrates that any economic data, together with the assumption of a constant share of production between capital and labor and respecting the assumption of constant returns to scale, can be expressed in the form of a Cobb-Douglas production function; he shows that the Cobb-Douglas function is in fact governed by algebraic relationships concerning the distribution of value added between capital and labor, and that the production function therefore does not ultimately rely on any genuine assumption about production itself.
To demonstrate this, Anwar Shaikh constructs a Cobb-Douglas function based on fictitious data (data tracing the word “Humbug”), which is strongly correlated with the underlying fictitious production function (R² = .993). In the same article, he also shows that Robert Solow’s article ‘Technical Change and the Aggregate Production Function’ paved the way for the neoclassical approach in the economic analysis of growth, makes the same mistake." \tilde{u}(x)= \prod_{i=1}^n x_i^{\lambda_i} Utility functions represent ordinal preferences and do not have natural units, unlike production functions.
As the result, a monotonic transformation of a utility function represents the same preferences. Unlike with a Cobb–Douglas production function, where the sum of the exponents determines the degree of economies of scale, the sum can be normalized to one for a utility function because normalization is a monotonic transformation of the original utility function.
Thus, let us define \lambda = \sum_{i=1}^n \lambda_i and \alpha_i = \frac{\lambda_i}{ \lambda} , so \sum_{i=1}^n \alpha_i = 1 , and write the utility function as: u(x) = \prod_{i =1}^n x_i^{\alpha_i} The consumer maximizes utility subject to the budget constraint that the cost of the goods is less than her wealth w . Letting p_i denote the goods' prices, she solves: \max_{x_i} \prod_{i=1}^n x_i^{\alpha_i} \quad \text{ subject to the constraint } \quad \sum_{i=1}^n p_i x_i= w The Marginal Rate of Substitution between each two goods is MRS_{i,j}=\frac{\alpha_i}{\alpha_j}{x_j \over x_i}={p_i \over p_j}\Rightarrow p_j x_j={p_i \alpha_j\over \alpha_i}x_i By inserting to the budget constrain we obtain p_i x_i + \textstyle \sum_{j\neq i}^n \displaystyle p_i x_i \frac{\alpha_j}{\alpha_i} = w \Rightarrow p_i x_i(1+\sum_{j\neq i}^n \frac{\alpha_j}{\alpha_i})=w \Rightarrow p_i x_i\frac{(\alpha_i +\sum_{j\neq i}^n \alpha_j)} {\alpha_i}=w \Rightarrow p_i x_i\frac{1} {\alpha_i}=w \Rightarrow x_i^*=\frac{\alpha_i w }{p_i} \forall i Note that p_i x^*_i = \alpha_i w , the consumer spends fraction \alpha_i of her wealth on good . Also note that each good is affected solely by its own price.
That is, any two goods are not substitute goods nor complementary goods. Namely, their cross elasticity equals to zero and the cross demand function of any good is described by a vertical line. Finally, note that when the income increase by some percent the demand for the good increase by the same percent.
That is, the elasticity of the demand with respect to income equals 1 and therefore, the Engel curve is a straight line starting from the origin. Note that this is the solution for either u(x) or \tilde{u}(x), since the same preferences generate the same demand. The indirect utility function can be calculated by substituting the demands x_i into the utility function.
Define the constant K= \prod_{i =1}^n \alpha_i^{\alpha_i} and we get: v(p,w) = \prod_{i =1}^n \left( \frac{w \alpha_i}{p_i} \right)^{\alpha_i} = \frac{ \prod_{i =1}^n w^{\alpha_i}\cdot \prod_{i =1}^n \alpha_i^{\alpha_i} }{ \prod_{i =1}^n p_i ^{\alpha_i}} =K \left(\frac{ w}{\prod_{i =1}^n p_i ^{\alpha_i}} \right) which is a special case of the Gorman polar form. The expenditure function is the inverse of the indirect utility function: e(p, u) = (1/K)\prod_{i=1}^n p_i^{\alpha_i} u The Marshallian demand function \ln(Y) = a_0 + \sum_i a_i \ln(I_i) where Y = \text{output} I_i = \text{inputs} a_i = \text{model coefficients} The model can also be written as Y = e^{a_0} (I_1)^{a_1} \cdot (I_2)^{a_2} \cdots As noted, the common Cobb–Douglas function used in economic modelling is Y =A L^\alpha K^\beta where L is labor, K is capital and A is a constant expressing the total factor productivity.
When the model exponents sum to one, the production function is first-order homogeneous, which implies constant returns to scale—that is, if all inputs are scaled by a common factor greater than zero, output will be scaled by the same factor. Y = A \left ( \alpha L^\gamma + (1-\alpha) K^\gamma \right )^{1/\gamma}, in which the limiting case corresponds to a Cobb–Douglas function, Y=AL^\alpha K^{1-\alpha}, with constant returns to scale.
To see this, the log of the CES function: \ln(Y) = \ln(A) + \frac{1}{\gamma} \ln \left (\alpha L^\gamma + (1-\alpha) K^\gamma \right ) can be taken to the limit by applying L'Hôpital's rule: \lim_{\gamma\to 0} \ln(Y) = \ln(A) + \alpha \ln(L) + (1-\alpha) \ln(K). Therefore, Y=AL^\alpha K^{1-\alpha} . The translog production function is an approximation of the CES function by a second-order Taylor polynomial in the variable \gamma about \gamma = 0 , i.e. the Cobb–Douglas case.
The name translog stands for "transcendental logarithmic." It is often used in econometrics for the fact that it is linear in the parameters, which means ordinary least squares could be used if inputs could be assumed exogenous.
In the two-factor case above the translog production function is \begin{align} \ln(Y) &= \ln(A) + \alpha \ln(L) + (1-\alpha) \ln(K) + \frac{1}{2} \gamma \alpha (1 - \alpha) \left[ \ln(L) - \ln(K) \right]^2 \\ &= \ln(A) + a_L \ln(L) + a_K \ln(K) + b_{LL} \ln^2(L) + b_{KK} \ln^{2}(K) + b_{LK} \ln(L) \ln(K) \end{align} where a_L , a_K , b_{LL} , b_{KK} , and b_{LK} are defined appropriately. In the three factor case, the translog production function is: \begin{align} \ln(Y) & = \ln(A) + a_L\ln(L) + a_K\ln(K) + a_M\ln(M) + b_{LL}\ln^2(L) +b_{KK}\ln^2(K) + b_{MM}\ln^2(M) \\ & {} \qquad \qquad + b_{LK}\ln(L)\ln(K) + b_{LM}\ln(L)\ln(M) + b_{KM}\ln(K)\ln(M) \\ & = f(L,K,M). \end{align} where A = total factor productivity, L = labor, K = capital, M = materials and supplies, and Y = output.
Closed Form Solution for a firm with an N-input production function
Text derived from https://en.wikipedia.org/w/index.php?oldid=1369429599 under CC BY-SA 4.0; modifications have been made.