Lesson plan
Code 11
Code 11 is a barcode symbology developed by Intermec in 1977, and it is used primarily in telecommunications. The symbol can encode any length string consisting of the digits 0–9 and the dash character (-). A twelfth code represents the start/stop character, commonly printed as "*". One or two modulo-11 check digit(s) can be included. It is a discrete, binary symbology where each digit consists of three bars and two spaces; a single narrow space separates consecutive symbols. The width of a digit is not fixed; three digits (0, 9 and -) have one wide element, while the others have two wide elements. The valid codes have one wide bar, and may have one additional wide element (bar or space). The decode table has 15 entries because the symbols with two wide bars (1, 4 and 5) are listed twice. Assuming narrow elements are one unit wide and wide elements are two units, the average digit is 7.8 units. This is better than codes with a larger repertoire like Codabar (10 units) or Code 39 (11 units), but not quite as good as interleaved 2 of 5 (7 units). The non-binary symbology Code 128 uses 5.5 units per digit (11 units per digit pair).
Article summary
Code 11 is a barcode symbology developed by Intermec in 1977, and it is used primarily in telecommunications. The symbol can encode any length string consisting of the digits 0–9 and the dash character (-). A twelfth code represents the start/stop character, commonly printed as "*". One or two modulo-11 check digit(s) can be included. It is a discrete, binary symbology where each digit consists of three bars and two spaces; a single narrow space separates consecutive symbols. The width of a digit is not fixed; three digits (0, 9 and -) have one wide element, while the others have two wide elements. The valid codes have one wide bar, and may have one additional wide element (bar or space). The decode table has 15 entries because the symbols with two wide bars (1, 4 and 5) are listed twice. Assuming narrow elements are one unit wide and wide elements are two units, the average digit is 7.8 units. This is better than codes with a larger repertoire like Codabar (10 units) or Code 39 (11 units), but not quite as good as interleaved 2 of 5 (7 units). The non-binary symbology Code 128 uses 5.5 units per digit (11 units per digit pair).
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.