Coherent diffraction imaging

Uses your system voice; voice and rate in settings.

Q5141350Snapshot

≈ 5 min read

Names in other languages

  • EnglishCoherent diffraction imaging
  • فارسیتصویربرداری پراش منسجم
  • 日本語コヒーレント回折イメージング

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Coherent diffractive imaging (CDI) is a computational microscopy method that reconstructs images from coherent diffraction patterns without the use of lenses. It was first experimentally demonstrated in 1999 by Miao and collaborators using synchrotron X-rays and iterative phase retrieval. CDI has been applied to image structures such as nanotubes, nanocrystals, porous nanocrystalline layers, defects, potentially proteins, and more. In CDI, a highly coherent beam of X-rays, electrons or other wavelike particle or photon is incident on an object.

The beam scattered by the object produces a diffraction pattern downstream which is then collected by a detector. This recorded pattern is then used to reconstruct an image via an iterative feedback algorithm. Effectively, the objective lens in a typical microscope is replaced with software to convert from the reciprocal space diffraction pattern into a real space image. The advantage in using no lenses is that the final image is aberration–free and so resolution is only diffraction and dose limited (dependent on wavelength, aperture size and exposure).

Applying a simple inverse Fourier transform to information with only intensities is insufficient for creating an image from the diffraction pattern due to the missing phase information. This is called the phase problem.

Coherent diffractive imaging (CDI) is a computational microscopy method that reconstructs images from coherent diffraction patterns without the use of lenses. It was first experimentally demonstrated in 1999 by Miao and collaborators using synchrotron X-rays and iterative phase retrieval. CDI has been applied to image structures such as nanotubes, nanocrystals, porous nanocrystalline layers, defects, potentially proteins, and more. In CDI, a highly coherent beam of X-rays, electrons or other wavelike particle or photon is incident on an object.

The beam scattered by the object produces a diffraction pattern downstream which is then collected by a detector. This recorded pattern is then used to reconstruct an image via an iterative feedback algorithm. Effectively, the objective lens in a typical microscope is replaced with software to convert from the reciprocal space diffraction pattern into a real space image. The advantage in using no lenses is that the final image is aberration–free and so resolution is only diffraction and dose limited (dependent on wavelength, aperture size and exposure).

Applying a simple inverse Fourier transform to information with only intensities is insufficient for creating an image from the diffraction pattern due to the missing phase information. This is called the phase problem.

Electrons

Coherent electron diffraction imaging works the same as CXDI in principle only electrons are the diffracted waves and an imaging plate is used to detect electrons rather than a CCD. In one published report a double walled carbon nanotube (DWCNT) was imaged using nano area electron diffraction (NAED) with atomic resolution. In principle, electron diffraction imaging should yield a higher resolution image because the wavelength of electrons can be much smaller than photons without going to very high energies.

Electrons also have much weaker penetration so they are more surface sensitive than X-rays. However, typically electron beams are more damaging than x-rays so this technique may be limited to inorganic materials. In Zuo's approach, a low resolution electron image is used to locate a nanotube. A field emission electron gun generates a beam with high coherence and high intensity. The beam size is limited to nano area with the condenser aperture in order to ensure scattering from only a section of the nanotube of interest.

The diffraction pattern is recorded in the far field using electron imaging plates to a resolution of 0.0025 1/Å. Using a typical HIO reconstruction method an image is produced with Å resolution in which the DWCNT chirality (lattice structure) can be directly observed. Zuo found that it is possible to start with non-random phases based on a low resolution image from a TEM to improve the final image quality. In 2007, Podorov et al. proposed an exact analytical solution of CDXI problem for particular cases.

In 2016 using the coherent diffraction imaging (CXDI) beamline at ESRF (Grenoble, France), the researchers quantified the porosity of large faceted nanocrystalline layers at the origin of photoluminescence emission band in the infrared. It has been shown that phonons can be confined in sub-micron structures, which could help enhance the output of photonic and photovoltaic (PV) applications.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377396236 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot coherent-diffraction-imaging-585859-3993556ac8b556fc · hash 3993556ac8b556fc3754aca908835dcd3c92e52aa87f3885542855de90ba3dc8 · captured 1790651325.0 · version history

Cite this page as: encyclopegia.org, “Coherent diffraction imaging”, snapshot coherent-diffraction-imaging-585859-3993556ac8b556fc. https://encyclopegia.org/a/coherent-diffraction-imaging

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.