Cohesion number

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Cohesion number (Coh) is a useful dimensionless number in particle technology by which the cohesivity of different powders can be compared. This is especially useful in DEM simulations (Discrete Element Method) of granular materials where scaling of the size and stiffness of the particles are inevitable due to the computationally demanding nature of the DEM modelling.

The Cohesion number (Coh) is a useful dimensionless number in particle technology by which the cohesivity of different powders can be compared.

How it works

This is especially useful in DEM simulations (Discrete Element Method) of granular materials where scaling of the size and stiffness of the particles are inevitable due to the computationally demanding nature of the DEM modelling. \text{Cohesion number}=\frac{\text{work of cohesion}}{\text{gravitational potential energy}} For example, in the JKR contact model the work of cohesion is 7.09\left ( \frac{\Gamma^5{R^*}^4}{{E^*}^2} \right )^{\frac{1}{3}} by which the Cohesion number is derived as follows: Coh=\frac{7.09\left ( \frac{\Gamma^5{R^*}^4}{{E^*}^2} \right )^{\frac{1}{3}}}{mgR^*} Mass can be shown in the form of density and volume and the constant number can be eliminated, Coh=\frac{7.09\left ( \frac{\Gamma^5{R^*}^4}{{E^*}^2} \right )^{\frac{1}{3}}}{\rho {R^*}^3 gR^*} The final version of the Cohesion number is as following: Coh=\frac{1}{\rho g}\left ( \frac{\Gamma^5}{{E^*}^2{R^*}^8} \right )^{\frac{1}{3}} \rho is the particle density g is the gravity \Gamma is the interfacial energy E^* is the equivalent Young’s modulus: E^*=(\frac{1-\nu_{1}^2}{E_{1}}+\frac{1-\nu_{2}^2}{E_{2}})^{-1} \nu is the material Poisson's ratio R^* shows the equivalent radius: R^*=(\frac{1}{R_{1}}+\frac{1}{R_{2}})^{-1} This number is dependent on the particles surface energy, particles size, particle density, gravity, and the Young’s modulus.

It well justifies that the materials having lower stiffness become “stickier” if adhesive and it is a useful scaling method for the DEM simulations at which Young’s modulus is selected smaller than the real value in order to increase the computational speed. Recently, a rigorous analysis of the contact stiffness reduction for the adhesive contacts to speed up the DEM calculations shows the same fractional form.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1292416834 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001292416834 · captured 1748285374.0 · version history

Cite this page as: encyclopegia.org, “Cohesion number”, snapshot enwiki-001292416834. https://encyclopegia.org/a/cohesion-number

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.