Cohesive zone model

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The cohesive zone model (CZM) is a model in fracture mechanics where fracture formation is regarded as a gradual phenomenon and separation of the crack surfaces takes place across an extended crack tip, or cohesive zone, and is resisted by cohesive tractions. The origin of this model can be traced back to the early sixties by Dugdale (1960) and Barenblatt (1962) to represent nonlinear processes located at the front of a pre-existent crack.

The cohesive zone model (CZM) is a model in fracture mechanics where fracture formation is regarded as a gradual phenomenon and separation of the crack surfaces takes place across an extended crack tip, or cohesive zone, and is resisted by cohesive tractions.

The origin of this model can be traced back to the early sixties by Dugdale (1960) and Barenblatt (1962) to represent nonlinear processes located at the front of a pre-existent crack. r_p = \frac{\pi}{8}\left(\frac{K_I}{\sigma_y}\right)^2 which is similar to, but slightly smaller than Irwin's predicted plastic zone diameter.

The general form of the crack tip opening displacement according to the Dugdale model at the points x = \pm a and y=0 is: \delta_t = \frac{8\sigma_y a}{\pi E} \ln\left[\sec\left(\frac{\pi \sigma^{\infty}}{2\sigma_{y}}\right)\right] This can be simplified for cases where \sigma^\infty \ll \sigma_{y} to: \delta_t = \begin{cases} \cfrac{K^2}{\sigma_y E} & \text{plane stress} \\ \cfrac{K^2}{2\sigma_y E} & \text{plane strain} \end{cases} The Barenblatt model (after G.I. Barenblatt) is analogous to the Dugdale model, but is applied to brittle solids.

This approach considers the interatomic stresses involved cracking, but considers a large enough area to apply to continuum fracture mechanics. Barenblatt's model assumes that "the width of the edge [cohesive] region of a crack is small compared to the size of the whole crack" in addition to the assumption for most fracture mechanics models that the stress fields of all cracks are the same for a given specimen geometry regardless of the remote applied stress.

In the Barenblatt model, the traction, \sigma_{yy} , is equal to the theoretical bond rupture strength of a brittle solid. This allows the strain energy release rate, G , to be defined by the critical crack opening displacement, \delta_c = 2v_c or the critical cohesive zone size, r_{co} , as follows: G_c = 2\int^{\nu_c}_0 \sigma_{yy}d\nu = \frac{8\sigma_{th}^2 r_{co}}{\pi E} = 2\gamma_s where \gamma_s is the surface energy.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1320338930 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.