Lesson plan
Coin edge
Coin edges are the parts of a coin's surface between the faces; they may be plain (smooth) or patterned, or a combination of both. They can also include lettering. Reeded edges are often referred to as "ridged" or "grooved" (US usage), or "milled" (UK usage). Some coins, such as United States quarters and dimes, have reeded edges. Reeding of edges was introduced to prevent coin clipping and counterfeiting. The main techniques of coin edging are edge mills of various types, which put a pattern on a smooth edge, after a coin and coin mills with edge rings, which pattern the edge at the time when the coin is being milled.
Article summary
Coin edges are the parts of a coin's surface between the faces; they may be plain (smooth) or patterned, or a combination of both. They can also include lettering. Reeded edges are often referred to as "ridged" or "grooved" (US usage), or "milled" (UK usage). Some coins, such as United States quarters and dimes, have reeded edges. Reeding of edges was introduced to prevent coin clipping and counterfeiting. The main techniques of coin edging are edge mills of various types, which put a pattern on a smooth edge, after a coin and coin mills with edge rings, which pattern the edge at the time when the coin is being milled.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.