Lesson plan

Cold shrinking

Cold shrinking is a process in motor vehicle bodyworks. Compared to hot shrinking, cold shrinking is a longer but nevertheless more preferred method most common especially with larger stretching areas. Cold shrinking is mostly done by use of a dolly hammer. The resulting rough surface is filled using a body filler or a body solder for a smoother finish. Cold shrinking is a method of panel beating where heating is not done to the stretched panel. This method is mostly suitable for integral cars with integral body panels such as hatchbacks.

Back to article

Article summary

Cold shrinking is a process in motor vehicle bodyworks. Compared to hot shrinking, cold shrinking is a longer but nevertheless more preferred method most common especially with larger stretching areas. Cold shrinking is mostly done by use of a dolly hammer. The resulting rough surface is filled using a body filler or a body solder for a smoother finish. Cold shrinking is a method of panel beating where heating is not done to the stretched panel. This method is mostly suitable for integral cars with integral body panels such as hatchbacks.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.