Coldstream Mill

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Coldstream Mill, near Beith in North Ayrshire, Scotland, was an early 19th century meal mill powered by the Dusk Water and Whitestone Burn that was enlarged from an existing much earlier watermill. The mill worked until 1991 and was the last traditional working water mill in Ayrshire and one of the last continuously worked watermills in Scotland. The mill buildings have been converted into a private dwelling and the mill pond has been retained.

Coldstream Mill, near Beith in North Ayrshire, Scotland, was an early 19th century meal mill powered by the Dusk Water and Whitestone Burn that was enlarged from an existing much earlier watermill. The mill worked until 1991 and was the last traditional working water mill in Ayrshire and one of the last continuously worked watermills in Scotland. The mill buildings have been converted into a private dwelling and the mill pond has been retained.

The mill

Coldstream was not mentioned in legal papers until 1728, but it may have been enlarged and improved circa 1673, as part of the general improvements in the barony carried out by Francis Montgomerie of Giffin for his son John's marriage, extending nearby Hessilhead Castle to become what was for a long time reckoned to be the best house in the district. John Montgomerie married Lady Margaret Carmichael, daughter of the Earl of Hyndford. John became Governor of New York. However, he accumulated a number of debts and he was forced to sell the barony in 1722. In 1820, George Robertson comments on the excellent lands of Cauldstream (sic), which lay in the Barony of Hessilhead. Most rural mills at the time only had a single set of millstones. However, the space between the stones in these mills was adjustable to cater for shelling or mealing.

The millers

's map of the Hessilhead area in 1829. John Andrew is listed in 1782 as the heir to John Miller, his grandfather, a miller in Coldstream. In 1810, the mill passed to William Fulton of Beith, who sold it in 1815 to David Kerr, a merchant of Beith, and Andrew Gibson, a baker. William Caldwell then purchased the mill, and it remained with the Caldwell family for the next hundred years. Thomas Caldwell was the miller in 1841, but by 1871 Thomas was farming, and the miller was Robert Jack. David Fergie was the miller in 1881, Thomas having retired.

By 1891, Robert Jack became the miller again and the sons of Thomas, William and Thomas, were the owners. In 1921, the Smith family bought the mill from Thomas Caldwell, Joseph Smith was the miller from 1911 until 1954. Andrew Smith, son of Joseph, then worked Coldstream Mill until 1991 when he suffered a stroke. Joseph had been a ploughman, however he had cousins who were millers at Perceton and Cunninghamhead mills.

Workings details

Marked on old maps as a corn mill, after being enlarged, Coldstream Mill was mainly involved in preparing animal feed or meals, grinding linseed cake, beans, maize and barley. The mill had three sets of millstones, usually with two working whilst one was being dressed, that is serviced and sharpened, on a three week cycle. The Marshal family, blacksmiths at nearby Gateside, annealed the tools used to dress the stones. The millstones could be operated as a set of three, two or only a single set of stones.

The mill never had an electricity supply and never needed any auxiliary power by steam or diesel engine due to the large mill pond and the plentiful water supply. Generally, the animal feed was delivered by train to Lugton station from Glasgow Docks and then carried to Coldstream by cart. The finished meal was delivered by donkey cart to local farms as required. During WW2 the mill was in full-time operation.

A small copse of mature trees was a long-term feature that was necessary to prevent the wooden buckets and lining from warping in the heat of the summer months when the mill was inactive due to the plentiful summer pastures and therefore, meal feed demand was low.

The mill pond

The Whitestone Burn and the Dusk Water powered the mill via the mill pond and the sluice control gear. No weir was present in the Dusk Water with only a few large boulders directing the current into the lake. A pair of stones across the lake indicated the point where the water level was sufficient for a day's milling. A board was dropped between the stones to prevent further water flow in order to prevent undue stress on the mill pond's extensive walls. The mill pond is unusual in the height and length of the dam walls that run parallel to the mill access lane. The greatest depth was 1.8 metres and an overflow sluice led to a laden that emptied into the Dusk Water.

Remnants and legacy

Some of the items from the mill are on display at the nearby Dalgarven Mill museum near Kilwinning. As stated, the mill was converted into a private house and the mill pond has been preserved as part of this development. The waterwheel remains as a feature and a millstone has been preserved internally.

See also

Barburgh Mill, Closeburn Dalgarven Mill, Kilwinning Enterkinfoot Mill Millmannoch, Coylton Meikle Millbank Mill Nether Mill

External links

The Kaim Hill Millstone Quarries Video footage. Meikle Millbank Mill, Lochwinnoch Video footage.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1365608004 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.