Lesson plan
Colloidal probe technique
The colloidal probe technique is commonly used to measure interaction forces acting between colloidal particles and/or planar surfaces in air or in solution. This technique relies on the use of an atomic force microscope (AFM). However, instead of a cantilever with a sharp AFM tip, one uses the colloidal probe. The colloidal probe consists of a colloidal particle of few micrometers in diameter that is attached to an AFM cantilever. The colloidal probe technique can be used in the sphere-plane or sphere-sphere geometries (see figure). One typically achieves a force resolution between 1 and 100 pN and a distance resolution between 0.5 and 2 nm. The colloidal probe technique has been developed in 1991 independently by Ducker and Butt. Since its development this tool has gained wide popularity in numerous research laboratories, and numerous reviews are available in the scientific literature. Alternative techniques to measure force between surfaces involve the surface forces apparatus, total internal reflection microscopy, and optical tweezers techniques to with video microscopy.
Article summary
The colloidal probe technique is commonly used to measure interaction forces acting between colloidal particles and/or planar surfaces in air or in solution. This technique relies on the use of an atomic force microscope (AFM). However, instead of a cantilever with a sharp AFM tip, one uses the colloidal probe. The colloidal probe consists of a colloidal particle of few micrometers in diameter that is attached to an AFM cantilever. The colloidal probe technique can be used in the sphere-plane or sphere-sphere geometries (see figure). One typically achieves a force resolution between 1 and 100 pN and a distance resolution between 0.5 and 2 nm. The colloidal probe technique has been developed in 1991 independently by Ducker and Butt. Since its development this tool has gained wide popularity in numerous research laboratories, and numerous reviews are available in the scientific literature. Alternative techniques to measure force between surfaces involve the surface forces apparatus, total internal reflection microscopy, and optical tweezers techniques to with video microscopy.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.