{
  "id": "enwiki-001358394258",
  "slug": "comma-code",
  "title": "Comma code",
  "qid": "",
  "lead": "A comma code is a type of prefix-free code in which a comma, a particular symbol or sequence of symbols, occurs at the end of a code word and never occurs otherwise. This is an intuitive way to express arrays. For example, Fibonacci coding is a comma code in which the comma is 11 . 11 and 1011 are valid Fibonacci code words, but 101 , 0111 , and 11011 are not.",
  "body": "A comma code is a type of prefix-free code in which a comma, a particular symbol or sequence of symbols, occurs at the end of a code word and never occurs otherwise. This is an intuitive way to express arrays. For example, Fibonacci coding is a comma code in which the comma is 11 . 11 and 1011 are valid Fibonacci code words, but 101 , 0111 , and 11011 are not. Of course we use a single comma to separate each field of data, therefore showing that all the data consists of 50% of commas. The cost-per-character quotient of higher base communication has to maintain near logarithmic values \\frac{log(base)}{log(2)} for the data and less than 2-bits for the comma character to maintain cost effectiveness here. This method has an assurance of a '1' or '2' after every comma and this property can be useful when designing around timing concerns in transmission. It can be somewhat expensive to convert a known binary value ( last value underlined does not technically require conversion to ternary ) to ternary ( we are considering the comma as digit '3' ), unless ternary bit costs are reduced to similar to binary bit costs, so this bit can be multiplexed in a separate binary channel if costs agree (this may require a read of an additional 'tail'/trailing portion of 2-bits of useful data or an entire unary code known to be around 2 bits as padding for the binary channel (from after the first bit of the first change as this is not an instantly-decodable code, simply read if using an instantly decodable unary code) to be around 3 bits similar to the 2 average ternary bits remaining on the primary channel equivalent to 2*\\frac{log(3)}{log(2)}=3.17 bits before cost comparisons are factored in). The padding is to try and ensure that relevant data across streams arrive at similar times to each other as otherwise we would have one bit ( the underlined last bit above ) in the binary channel and around 3.17 bits in the ternary channel ( including just comma for all the commas ) ( again not factoring in a completely different mode of transmission with possibly different latency ). Not considering multiplexing, this method has a read efficiency of 3 ternary digits for a read of 4 binary bits or 1.33 bits. Or \\frac{4/3}\\frac{log(3)}{log(2)}=84.12% This method allows a bitstring or number of length n to be expressed in 2n bits assuming 0s and 1s are present in equal measure in the data. 66.66% (2/3) commas in all data axiom - All implied data specifically variable length data can be shown to be consisting of exactly 66.66% (2/3) of commas. Where '?' is '1' or '2' for the value of the bijective digit that requires no further processing. This method results in statistical similarity to a simple 'implied read' of Huffman base 3 codes: 0 , 10 , 11 (net 2/3 or 66.66% commas). It can be seen by random walk techniques and by statistical summation that all generic data has a header or comma of an average of 2 bits and data of an additional 1 bit (minimum 0). This has no assurance of a '1' or '2' after every '0' (comma) a property that can be useful when designing around timing concerns in transmission. This method has a read efficiency of 2 ternary digits for a read of 3 binary bits or 1.5 binary bits/ternary digit. Or \\frac{3/2}\\frac{log(3)}{log(2)}=94.64% This method allows a bitstring or number of length n to be expressed in 2n+1 bits assuming 0s and 1s are present in equal measure in the data. One can assume that the value 0 is 0 bits or an empty string \"\" followed by the 1. 34.375% | 31.25% (~ 1/3) write commas for efficiency gains using number partitioning – Implied reads and writes using number partitioning techniques ('m' numbers divided into 'n' partitions result in n^m permutations) similar to Chen-Ho and Hertz encoding show greater efficiency of both reads and writes similar to nearly random distribution. Thus the use of codes makes less sense and the use of higher bases becomes more important. Similarly, a 'write' comma becomes any number in the base, a 'read' comma is the header shown below, Huffman base 4 codes: 0 , 10 , 110 , 111 . The main advantage to this technique apart from higher efficiency is that there is no base conversion required which would require the entire stream to be read first and then converted. The disadvantage is that the average number length becomes higher and similar to random number generation and timing concerns that govern ternary transmission come to the fore. With m=2 and n=2, we get, not forgetting that a value of '(2)' is essentially 0-bits: This method therefore has a read efficiency of 2 ternary digits for a read of 50*3+25*3+12.5*4+12.5*3=3.125 binary bits or 1.5625 binary bits/ternary digit. Or \\frac{3.125*\\frac{1}2}\\frac{log(3)}{log(2)}=98.58% . A write efficiency of 2 ternary digits for a write of \\frac{4}9*3+\\frac{2}9*3+\\frac{2}9*4+\\frac{1}9*3=3.22 bits or 1.61 binary bits/ternary digit, or \\frac{\\frac{log(3)}{log(2)}}{\\frac{29}{9}*\\frac{1}2}=98.38% Cardinal numbers for efficient base conversion – Since it has been ascertained that comma codes are very similar to base conversion, the only concern being efficiency and timing, the direct conversion/mapping of 19 binary bits 2^{19} = 524288 numbers to 12 ternary trits 3^{12} = 531441 numbers allow for an efficiency of \\frac{2^{19}}{3^{12}}=98.65% or \\frac{log_3{2^{19}}}{12}=99.9% efficiency depending upon the method of calculation. This works because 2^{19} and 2^{19} ≃ 3^{12} . This of course is more of a theoretical construct and has no mention about timing when trying to apply this to ternary transmission methods. It does however leave 531441 - 524288 = 7153 codes to design around timing concerns.",
  "categories": [
    "20476821",
    "72655480"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1358394258",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1780912760.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001358394258",
    "type": "webpage",
    "title": "Comma code",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/comma-code",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001358394258",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1358394258",
    "note": "Immutable snapshot enwiki-001358394258"
  }
}