Command descriptor block

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In SCSI, the command descriptor block (CDB) is a structure used for sending commands between computers and peripheral devices. This is often particularly used as a standard for transferring data between computers and storage devices.

In SCSI, the command descriptor block (CDB) is a structure used for sending commands between computers and peripheral devices. This is often particularly used as a standard for transferring data between computers and storage devices.

Description

In the initial SCSI-1 specification, the CDB can be a total of 6, 10, 12, or 16 bytes. Later versions of the SCSI standard such as iSCSI allow for variable-length CDBs. The CDB consists of a one-byte operation code followed by some command-specific parameters. The parameters need not be a full byte long, and the parameter length varies from one command to another. The available commands, with links to articles describing the detailed structure of many of them, are listed in the article List of SCSI commands. Typical CDB structures, for the 6- and 16-byte SCSI Request Sense Command, opcode 3, are: An example with different allocation of bits to parameters is the 6-byte SCSI Mode Sense Command: The generic form of the 12-byte CDB is:

Text derived from https://en.wikipedia.org/w/index.php?oldid=1366840427 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.