Commodore 1541

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Commodore 1541 (also known as the CBM 1541 and VIC-1541) is a floppy disk drive which was made by Commodore International for the Commodore 64 (C64), Commodore's most popular home computer. The best-known floppy disk drive for the C64, the 1541 is a single-sided 170-kilobyte drive for 5¼" disks. The 1541 directly followed the Commodore 1540 (meant for the VIC-20). The disk drive uses group coded recording (GCR) and contains a MOS Technology 6502 microprocessor, doubling as a disk controller and on-board disk operating system processor. The number of sectors per track varies from 17 to 21 (an early implementation of zone bit recording with 4 constant angular velocity zones). The drive's built-in disk operating system is CBM DOS 2.6.

The Commodore 1541 (also known as the CBM 1541 and VIC-1541) is a floppy disk drive which was made by Commodore International for the Commodore 64 (C64), Commodore's most popular home computer. The best-known floppy disk drive for the C64, the 1541 is a single-sided 170-kilobyte drive for 5¼" disks. The 1541 directly followed the Commodore 1540 (meant for the VIC-20). The disk drive uses group coded recording (GCR) and contains a MOS Technology 6502 microprocessor, doubling as a disk controller and on-board disk operating system processor.

The number of sectors per track varies from 17 to 21 (an early implementation of zone bit recording with 4 constant angular velocity zones). The drive's built-in disk operating system is CBM DOS 2.6. If the disk side is not otherwise prepared with a custom format, (e.g. for data disks), 664 blocks would be free after formatting, giving 664 254 = (or almost ) for user data. By using custom formatting and load/save routines (sometimes included in third-party DOSes, see below), all of the mechanically possible 40 tracks can be used.

Owing to the drive's non-use of the index hole, it is also possible to make "flippy floppies" by inserting the diskette upside-down and formatting the other side, and it is commonplace and normal for commercial software to be distributed on such disks. Tracks 36–42 are non-standard. The bitrate is the raw one between the read/write head and signal circuitry so actual useful data rate is a factor 5/4 less due to GCR encoding. The 1541 disk typically has 35 tracks. Track 18 is reserved; the remaining tracks are available for data storage.

The header is on 18/0 (track 18, sector 0) along with the BAM, and the directory starts on 18/1 (track 18, sector 1). The file interleave is 10 blocks, while the directory interleave is 3 blocks.

Header contents: The header is similar to other Commodore disk headers, the structural differences being the BAM offset ( ) and size, and the label+ID+type offset ( ). $00–01 T/S reference to first directory sector (18/1) 02 DOS version ('A') 04–8F BAM entries (4 bytes per track: Free Sector Count + 24 bits for sectors) 90–9F Disk Label, $A0 padded A2–A3 Disk ID A5–A6 DOS type ('2A')

External links

Disk Preservation Project: internal drive mechanics and copy protection Undocumented 1541 drive functions from the Project 64 website RUN Magazine Issue 64 devili.iki.fi: Beyond the 1541, Mass Storage For The 64 And 128, COMPUTE!'s Gazette, issue 32, February 1986 (market overview) 1541 Maintenance Guide from Bitsavers Freespin, the Commodore 1541 graphical demo running on the floppy drive The Ultimate Commodore 1541 Disk Drive Talk (video), a recording of a talk in Aug 2021 at the VCF West 2021

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378697424 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

20 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.