Commodore 64 peripherals
≈ 8 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Commodore 64 home computer used various external peripherals. Due to the backwards compatibility of the Commodore 128, most peripherals would also work on that system. There is also some compatibility with the VIC-20 and Commodore PET.
The Commodore 64 home computer used various external peripherals. Due to the backwards compatibility of the Commodore 128, most peripherals would also work on that system. There is also some compatibility with the VIC-20 and Commodore PET.
Input/Output
Dot-matrix
A series of dot-matrix printers were sold by Commodore, including the MPS 801 (OEM Seikosha GP 500 VC) and the MPS 803, although many other third-party printers like the Okimate 10 and Okidata 120 were popular too - some having more advanced printing features than any of Commodore's models. Most Commodore-branded printers were rebranded C. Itoh or Epson models with Commodore serial interface. Also Star Micronics AR-40 has a C64 compatible serial port.
Daisy wheel
Commodore also produced the DPS-1101 daisy wheel printer, which produced letter quality print similar to a typewriter based on a Juki mechanism , and which typically cost more than the computer and floppy disk drive together. The DPS-1101 was large enough to accept A4 size paper in landscape orientation as well as A3 size paper in portrait orientation. The MPS-1000 dot matrix printer was introduced along with the C-128. Commodore 1526 is a rebranded MPS 802.
Plotter
A mini plotter device, the Commodore 1520, could plot graphics and print text in four colors by using tiny ballpoint pens. The 1520 was based upon the Alps Electric DPG1302, a mechanism which also formed the basis of numerous other inexpensive plotters for home computers of the time (e.g. the Atari 1020).
Third-party printer interfaces and buffers
Since there were severe shortcomings of early Commodore printers, CARDCO released the Card Print A (C/?A) printer interface that emulated Commodore printers by converting the Commodore-style CBM-bus IEEE-488 serial interface to a Centronics printer port to allow numerous 3rd-party printers to be connected to a Commodore 64, such as Epson, Okidata, C. Itoh. A second model, a version that supported printer graphics was released called the Card Print +G (C/?+G), supported printing Commodore graphic characters using ESC/P escape codes.
CARDCO released additional enhancements, including a model with RS-232 output, and shipped a total over 2 million printer interfaces. Xetec also released a series of printer interfaces, including the Super Graphix, Super Graphix Jr, and Super Graphix Gold. With a parallel interface, the QMS KISS laser printer, the most inexpensive available in 1986, at , could be used. Later, CMD created the GeoCable which allowed PS2-type ink-jet and laser printers to work under GEOS with a special device driver.
Printer buffer with 64 kB RAM for the CBM-bus IEC IEEE-488 derative serial bus existed too, like the "Brachman Associates Serial Box Print Buffer".
Present and Future devices
While CMD no longer produces Commodore hardware, new peripherals are still being developed and produced, mostly for mass storage or networking purposes. The MMC64 cartridge allows the C64 to access MMC- and SD flash memory cards. And several revisions and add-ons have been developed for it to take advantage of extra features. It features an Amiga clock port for connecting a RR-Net Ethernet-Interface, an MP3 player add-on called 'mp3@c64' has even been produced for it. In February 2008, Individual Computers started shipping the MMC Replay.
It unites the MMC64 and the Retro Replay in one cartridge, finally built with proper case-fit in mind (even including the RRnet2 Ethernet add-on). It contains many improvements, such as C128 compatibility, a built-in .d64 mounter (not speedloader-compatible though, because the 1541 CPU is not emulated), ROM for a total of eight cartridges, 512 kB RAM, a built-in flash-tool for cartridge images and wider support for various types of cartridges (not merely Action-replay-based).
In April 2008, the first batch of 1541 Ultimate shipped, a project by the hobbyist VHDL-developer Gideon Zweijtzer. This is a cartridge that carries an Action Replay and Final Cartridge (whatever the user prefers) and a very compatible FPGA-emulated 1541 drive that is fed from a built-in SD-card slot (.d64, prg etc.).
The difference to other SD-based and .d64 mounting cartridges like the MMC64, Super Snapshot 2007 or MMC Replay is, that the 6502 that powers the 1541 Floppy and the 1541's mechanical behavior (even sound) is fully emulated, making it theoretically compatible with almost anything. File selection and management is done via a third button on the cartridge that brings up a new menu on screen. The 1541 Ultimate also works in standalone mode without a c-64, functioning just like a normal Commodore 1541 would.
Disk-selection of .d64s is then done via buttons on the cartridge, power is supplied via USB. There is a "Plus-Version" available with an extra 32 Megabytes of RAM (as REU and for future use), the basic version has just enough RAM for the advertised functions to work. In October 2008, the second and third batch of 1541 Ultimates were produced to match the public demand for the device. The regular version without the 32MB RAM was dropped since there was no demand for it. Due to public demand, there is also a version with Ethernet now.
In 2010 a completely new PCB and software has been developed by Gideon Zweijtzer to facilitate the new 1541-Ultimate-II cartridge. The IDE64 interface cartridge provides access to parallel ATA drives like hard disks, CD/DVD drives, LS-120, Zip drives, and CompactFlash cards. It also supports network drives (PCLink) to directly access a host system over various connection methods including X1541, RS-232, Ethernet and USB. The operating system called IDEDOS provides CBM/CMD compatible interface to programs on all devices.
The main filesystem is called CFS, but there's read-only support for ISO 9660 and FAT12/16/32. Additional features include BASIC extension, DOS Wedge, file manager, machine code monitor, fast loader, BIOS setup screen. Today's computer mice can be attached via the Micromys interface that can process even optical mice and similar. There are also various interfaces for plugging the 64 to a PC keyboard. A board for converting Commodore 64 video signals to standard VGA monitor output is also currently under development.
Also, a board to convert the Commodore 128's 80 column RGBI CGA-compatible video signal to VGA format was developed in late 2011. The board, named the C128 Video DAC, had a limited production run and was used in conjunction with the more widespread GBS-8220 board. In September 2008, Individual Computers announced the Chameleon, a Cartridge for the Expansion Port that adds a lot of previously unseen functionality. It has a Retro-Replay compatible Freezer and MMC/SD-Slot, REU and a PS/2 connector for a PC Keyboard.
Support for a network adapter and battery-backed real time clock exists. The cartridge does not even have to be plugged into a Commodore 64 and can be used as a standalone device using USB power. Since the cartridge essentially also includes a Commodore One it is possible to include a VGA Port that outputs the picture to a standard PC monitor. The Commodore One core also allows the cartridge to be used as a CPU accelerator, and a core to run a Amiga environment in standalone mode also exists.
Unlike most other modern-day C64 hardware, this cartridge ships with a bright yellow case. Shipping was announced for Q1/2009, and currently the cartridge is available, although the firmware is in a beta state. A standalone mode docking station is under development. Retro Innovations is shipping the uIEC device, which utilizes the core design of the SD2IEC project to provide a mass media solution for Commodore 8-bit systems that utilize the Commodore IEC Serial Bus. NKCElectronics of Florida is shipping SD2IEC hardware which uses the sd2iec firmware.
Manosoft sells the C64SD Infinity, another SD card media solution which uses the sd2iec firmware. In Summer of 2013, another commercial variant of the SD2IEC-Device appears on market, the SD2IEC-evo2 from 16xEight. This device uses a bigger uC (ATmega1284P) and includes extras such as battery-backed RTC, connector for LCD, and multicolour status LED. 2014 sees the emergence of another commercial variant of SD2IEC hardware. thefuturewas8bit SD2IEC Versions are available packaged to resemble a miniature 1541 disk drive.
It has illuminated disk change and reset buttons accessible from the top of the case.
References
Home Recording - Music discussion board thread linking to many others relevant to C64 music RUN Magazine Issue 39 May, 1986 special printer issue elektronik.si: Vic-Rel internal PCB bilgisayarlarim.com: Commodore MPS-801 teardown (dated 2007-05-07, accessed 2016-04-28)
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377686724 under CC BY-SA 4.0; modifications have been made.