Lesson plan

Commodore 8060

The Commodore 8060, 8061, and 8062 are a series of 8" floppy disk drives developed by Commodore Business Machines. These disk drives use the parallel interface IEEE-488 to connect with Commodore's PET and CBM-II line of microcomputers. The 8060 is a single-disk model, while the 8061 and 8062 are both double-drive models similar to the later Commodore 8280 8" drive. The drives in the 806x series are full-height Shugart SA-800s. All of the models in the 8060 series use Commodore group coded recording (GCR) for disk reading and writing; the later 8061 and 8062 models can also read and write IBM 3740 format disks. Each drive in the series contains two MOS 6502 microprocessors for operating the disk controllers and executing the built-in disk operating system. The built-in operating system is CBM DOS 2.7. The ROM on the 8061 and 8062 does not contain support for formatting disks; instead a provided utility disk had the formatter program, which allows the user to select between native 806x and IBM 3740 formats. The utility disk also contained a program for doing whole disk copies of IBM disks as well as the VALIDATE command, which is included in the ROM of all other Commodore drives.

Back to article

Article summary

The Commodore 8060, 8061, and 8062 are a series of 8" floppy disk drives developed by Commodore Business Machines. These disk drives use the parallel interface IEEE-488 to connect with Commodore's PET and CBM-II line of microcomputers. The 8060 is a single-disk model, while the 8061 and 8062 are both double-drive models similar to the later Commodore 8280 8" drive. The drives in the 806x series are full-height Shugart SA-800s. All of the models in the 8060 series use Commodore group coded recording (GCR) for disk reading and writing; the later 8061 and 8062 models can also read and write IBM 3740 format disks. Each drive in the series contains two MOS 6502 microprocessors for operating the disk controllers and executing the built-in disk operating system. The built-in operating system is CBM DOS 2.7. The ROM on the 8061 and 8062 does not contain support for formatting disks; instead a provided utility disk had the formatter program, which allows the user to select between native 806x and IBM 3740 formats. The utility disk also contained a program for doing whole disk copies of IBM disks as well as the VALIDATE command, which is included in the ROM of all other Commodore drives.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.