Lesson plan

Common-network interface ring

The common-network interface ring (CNI ring) provides common-channel signaling (CCS) functionality on several Alcatel-Lucent SS7 products. It was introduced by Western Electric in the early 1980s but is still used today in all 1AESS and 4ESS, offices, and most of the wireline 5ESS offices. It was designed and manufactured at the combined Bell Labs–WECo location in Columbus, Ohio.

Back to article

Article summary

The common-network interface ring (CNI ring) provides common-channel signaling (CCS) functionality on several Alcatel-Lucent SS7 products. It was introduced by Western Electric in the early 1980s but is still used today in all 1AESS and 4ESS, offices, and most of the wireline 5ESS offices. It was designed and manufactured at the combined Bell Labs–WECo location in Columbus, Ohio.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.