Commutation (telemetry)

WD2, in blue, sampled at half the frame rate and transmitted in alternating minor frames) and a supercommutated measurand (word WD4, in orange, sampled at twice the frame rate and thus included twice in each minor frame) In telemetry…

Uses your system voice; voice and rate in settings.

≈ 2 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In telemetry, commutation is a process whereby multiple data streams ("measurands"), possibly with differing data rates, are combined into a single frame-based stream for transmission, before being separated again (decommutated) upon reception; it is a form of time-division multiplexing. Frame synchronization must be achieved before a data stream can be decommutated.[1]

Etymology

edit edit source

Commutation is named by analogy with electric commutators, which engage multiple electrical contacts in sequence as they rotate; similarly, telemetry commutation involves sampling a sequence of data sources in turn, before returning to the first data source. Hardware or software which performs commutation is referred to as a commutator; its opposite at the receiving end is a decommutator. Dedicated hardware generally supports faster commutation and decommutation than software on a general purpose architecture.[1]

Mechanism

edit edit source

A set of data words, together with synchronization and ID or counter words, constitute a minor frame; a set number of minor frames are combined to form a major frame. Measurands occupy fixed positions within each major frame, with these positions defined in a database, allowing them to be extracted. Measurands may be sampled multiple times within each minor frame (supercommutation), or they may only be sampled once in several frames (subcommutation), depending on the required data rate for each measurand.[1]

Commutated frames may also contain asynchronous data, which require further processing to extract.[1]

Decommutators may be equipped to handle multiple frame formats, containing different sets of measurands in different positions, for use in different operating modes; a switch in format may be signaled with a specific measurand. Translators exist to allow support for equipment-specific database formats.[1]

Decommutated measurand values may be stored in a "current value table" or other architecture.[1]

See also

edit edit source

References

edit edit source
  1. ^ a b c d e f "Decommutation". L-3 Communications. Archived from the original on 2017-03-19. Retrieved 29 August 2016. Wikipedia revision 1374163921, retrieved 2026-11-19

Further reading

edit edit source

Text derived from https://en.wikipedia.org/w/index.php?oldid=1374163921 under CC BY-SA 4.0; modifications have been made.

Words in each sectionMechanismMechanismMechanism: 166 words166EtymologyEtymologyEtymology: 79 words79Further readingFurther readingFurther reading: 29 words29See alsoSee alsoSee also: 4 words4
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001374163921 · captured 2026-09-10 · ledger · version history

Cite this page as: encyclopegia.org, “Commutation (telemetry)”, snapshot enwiki-001374163921. https://encyclopegia.org/a/commutation-telemetry