Lesson plan
Compelled signalling
Compelled signalling is a class of telecommunications signalling protocols that acknowledge the receipt of each discrete signal before the next signal can be sent. For example, in register signalling in Signalling System R2, the transmission of each signal involves the following five events: *The outgoing trunk begins sending the tones that correspond to the signal it wishes to convey in the forward direction; *The incoming trunk, once it has correctly detected the initiating signal, begins sending a set of confirmation tones in the backward direction; *The outgoing trunk, once it has correctly detected the confirmation tones, stops sending the signal tones in the forward direction; *The incoming trunk, once it has correctly detected the end of the signal tones (that is: that the forward channel is now silent) stops sending its confirmation tones in the backward direction; *Before being able to begin sending the next signal, if any, the outgoing trunk needs to ensure that it is receiving silence on the backward channel. The method is only relevant in the case of signalling systems that use discrete signals (e.g. a combination of tones to denote a digit), as opposed to signalling systems that are message-oriented, such as Signaling System 7 (SS7) and ISDN Q.931, where each message is able to convey multiple items of information (e.g.…
Article summary
Compelled signalling is a class of telecommunications signalling protocols that acknowledge the receipt of each discrete signal before the next signal can be sent. For example, in register signalling in Signalling System R2, the transmission of each signal involves the following five events: *The outgoing trunk begins sending the tones that correspond to the signal it wishes to convey in the forward direction; *The incoming trunk, once it has correctly detected the initiating signal, begins sending a set of confirmation tones in the backward direction; *The outgoing trunk, once it has correctly detected the confirmation tones, stops sending the signal tones in the forward direction; *The incoming trunk, once it has correctly detected the end of the signal tones (that is: that the forward channel is now silent) stops sending its confirmation tones in the backward direction; *Before being able to begin sending the next signal, if any, the outgoing trunk needs to ensure that it is receiving silence on the backward channel. The method is only relevant in the case of signalling systems that use discrete signals (e.g. a combination of tones to denote a digit), as opposed to signalling systems that are message-oriented, such as Signaling System 7 (SS7) and ISDN Q.931, where each message is able to convey multiple items of information (e.g.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.