Compliance constants

Compliance constants are the elements of an inverted Hessian matrix.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Compliance constants are the elements of an inverted Hessian matrix. The calculation of compliance constants provides an alternative description of chemical bonds in comparison with the widely used force constants explicitly ruling out the dependency on the coordinate system. They provide the unique description of the mechanical strength for covalent and non-covalent bonding.

While force constants (as energy second derivatives) are usually given in aJ/Å or N/cm, compliance constants are given in Å /aJ or Å / mdyn. V = V_0 + G^TZ + {1 \over 2}Z^THZ + ... (eq.

1) where Z is a column vector of arbitrary and fully determined displacement coordinates, and G and H are the corresponding gradient (first derivative of V ) and Hessian (second derivative of V ), respectively. The point of interest is the stationary point on a potential energy surface (PES), so G is treated as zero, and by considering the relative energy, V_0 as well becomes zero.

By assuming harmonic potential and regarding the third derivative term and forth as negligible, the potential energy formula then simply becomes: V = {1 \over 2}Z^THZ (eq. 2) Transitioning from cartesian coordinates Z to internal coordinates Q , which are more commonly used for the description of molecular geometries, gives rise to equation 3: V = {1 \over 2}Q^TH_qQ (eq.

3) where H_q is the corresponding Hessian for internal coordinates (commonly referred to as force constants), and it is in principle determined by the frequencies of a sufficient set of isotopic molecules. Since the Hessian H_q is the second derivative of the energy with respect to displacements and that is the same as the first derivative of the force, evaluation of this property as shown in equation 4 is often used to describe chemical bonds.

H_q = \biggl({\partial^2V\over\partial Q_i\partial Q_j}\biggr)_0 (eq. 4) Nevertheless, there are several issues with this method as explained by Grunenberg, including the dependence of force constants on the choice of internal coordinates and the presence of the redundant Hessian which has no physical meaning and consequently engenders ill-defined description of bond strength.

V = {1 \over 2}{G_q}^TCG_q (eq. 5) This gradient G_q is the first derivative of the potential energy with respect to the displacement coordinates, which can be expressed as shown: G_q = H_qQ (eq. 6) By substituting the expression of G_q in eq.

5 into equation 5, equation 7 is obtained. V = {1 \over 2}Q^T{H_q}^TCH_qQ (eq. 7) Thus, with the knowledge that H_q is positive definite, the only possible value of C which is the compliance matrix then must be: C = {H_q}^{-1} (eq.

8) Equation 7 offers a surrogate formulation of the potential energy which proves to be significantly advantageous in defining chemical bonds. Specially, this method is independent on coordinate selection and also eliminates such issue with redundant Hessian that the common force constant calculation method suffers with.

Intriguingly, compliance constants calculation can be employed regardless of the redundancy of the coordinates.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1330998441 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.