Lesson plan

Computed torque control

Computed torque control is a control scheme used in motion control in robotics. It combines feedback linearization via a PID controller of the error with a dynamical model of the controlled robot. Let the dynamics of the controlled robot be described by \mathbf{M}\left( \vec\theta \right) \ddot\vec\theta + \mathbf{C}\left( \vec\theta, \dot\vec\theta \right) \dot\vec\theta + \vec\tau_g \left(\vec\theta\right) = \vec\tau where \vec\theta \in \mathbb{R}^N is the state vector of joint variables that describe the system, \mathbf{M}\left(\vec\theta\right) is the inertia matrix, \mathbf{C}\left( \vec\theta, \dot\vec\theta \right) \dot\vec\theta is the vector Coriolis and centrifugal torques, \vec\tau_g \left(\vec\theta\right) are the torques caused by gravity and \vec\tau is the vector of joint torque inputs. Assume that we have an approximate model of the system made up of \tilde\mathbf{M}\left( \vec\theta \right), \tilde\mathbf{C}\left( \vec\theta, \dot\vec\theta \right), \tilde\vec\tau_g \left(\vec\theta\right) .…

Back to article

Article summary

Computed torque control is a control scheme used in motion control in robotics. It combines feedback linearization via a PID controller of the error with a dynamical model of the controlled robot. Let the dynamics of the controlled robot be described by \mathbf{M}\left( \vec\theta \right) \ddot\vec\theta + \mathbf{C}\left( \vec\theta, \dot\vec\theta \right) \dot\vec\theta + \vec\tau_g \left(\vec\theta\right) = \vec\tau where \vec\theta \in \mathbb{R}^N is the state vector of joint variables that describe the system, \mathbf{M}\left(\vec\theta\right) is the inertia matrix, \mathbf{C}\left( \vec\theta, \dot\vec\theta \right) \dot\vec\theta is the vector Coriolis and centrifugal torques, \vec\tau_g \left(\vec\theta\right) are the torques caused by gravity and \vec\tau is the vector of joint torque inputs. Assume that we have an approximate model of the system made up of \tilde\mathbf{M}\left( \vec\theta \right), \tilde\mathbf{C}\left( \vec\theta, \dot\vec\theta \right), \tilde\vec\tau_g \left(\vec\theta\right) .…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.