Lesson plan

Computer-aided maintenance

Computer-aided maintenance (not to be confused with CAM which usually stands for Computer Aided Manufacturing) refers to systems that utilize software to organize planning, scheduling, and support of maintenance and repair. A common application of such systems is the maintenance of computers, either hardware or software, themselves. It can also apply to the maintenance of other complex systems that require periodic maintenance, such as reminding operators that preventive maintenance is due or even predicting when such maintenance should be performed based on recorded past experience.

Back to article

Article summary

Computer-aided maintenance (not to be confused with CAM which usually stands for Computer Aided Manufacturing) refers to systems that utilize software to organize planning, scheduling, and support of maintenance and repair. A common application of such systems is the maintenance of computers, either hardware or software, themselves. It can also apply to the maintenance of other complex systems that require periodic maintenance, such as reminding operators that preventive maintenance is due or even predicting when such maintenance should be performed based on recorded past experience.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.