computer-aided manufacturing
≈ 8 min read
Names in other languages
- Españolfabricación asistida por computadora
- Françaisfabrication assistée par ordinateur
- PolskiKomputerowe wspomaganie wytwarzania
- Englishcomputer-aided manufacturing
- Italianocomputer-aided manufacturing
- 한국어컴퓨터 지원 제조
- 简体中文计算机辅助制造
- 繁體中文電腦輔助製造
- 中文電腦輔助製造
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
machined part CAM (computer-aided manufacturing), also known as computer-aided modeling or computer-aided machining is the use of software to control machine tools in the manufacturing of work pieces. This is not the only definition for CAM, but it is the most common. It may also refer to the use of a computer to assist in all operations of a manufacturing plant, including planning, management, transportation and storage.
Its primary purpose is to create a faster production process and components and tooling with more precise dimensions and material consistency, which in some cases, uses only the required amount of raw material (thus minimizing waste), while simultaneously reducing energy consumption. CAM is now a system used in schools and lower educational purposes.
CAM is a subsequent computer-aided process after computer-aided design (CAD) and sometimes computer-aided engineering (CAE), as the model generated in CAD and verified in CAE can be input into CAM software, which then controls the machine tool. CAM is used in many schools alongside CAD to create objects.
machined part CAM (computer-aided manufacturing), also known as computer-aided modeling or computer-aided machining is the use of software to control machine tools in the manufacturing of work pieces. This is not the only definition for CAM, but it is the most common. It may also refer to the use of a computer to assist in all operations of a manufacturing plant, including planning, management, transportation and storage.
Its primary purpose is to create a faster production process and components and tooling with more precise dimensions and material consistency, which in some cases, uses only the required amount of raw material (thus minimizing waste), while simultaneously reducing energy consumption. CAM is now a system used in schools and lower educational purposes.
CAM is a subsequent computer-aided process after computer-aided design (CAD) and sometimes computer-aided engineering (CAE), as the model generated in CAD and verified in CAE can be input into CAM software, which then controls the machine tool. CAM is used in many schools alongside CAD to create objects.
Overview
s, manufactured using WorkNC CAM Traditionally, CAM has been a numerical control (NC) programming tool, wherein two-dimensional (2-D) or three-dimensional (3-D) models of components are generated in CAD. As with other "computer-aided" technologies, CAM does not eliminate the need for skilled professionals such as manufacturing engineers, NC programmers, or machinists. CAM leverages both the value of the most skilled manufacturing professionals through advanced productivity tools, while building the skills of new professionals through visualization, simulation and optimization tools. A CAM tool generally converts a model to a language the target machine in question understands, typically G-code. The numerical control can be applied to machining tools, or more recently to 3D printers.
History
Early commercial applications of CAM were in large companies in the automotive and aerospace industries; for example, Pierre Bézier's work developing the CAD/CAM application UNISURF in the 1960s for car body design and tooling at Renault. Alexander Hammer at DeLaval Steam Turbine Company invented a technique to progressively drill turbine blades out of a solid block of metal with the drill controlled by a punch card reader in 1950.
Boeing first obtained NC machines in 1956, made by companies such as Kearney and Trecker, Stromberg-Carlson and Thompson Ramo Wooldridge. Historically, CAM software was seen to have several shortcomings that necessitated an overly high level of involvement by skilled CNC machinists. CAM software would output code for the least capable machine, as each machine tool control added on to the standard G-code set for increased flexibility.
In some cases, such as improperly set up CAM software or specific tools, the CNC machine required manual editing before the program will run properly. None of these issues were so insurmountable that a thoughtful engineer or skilled machine operator could not overcome for prototyping or small production runs; G-Code is a simple language. In high production or high precision shops, a different set of problems were encountered where an experienced CNC machinist must both hand-code programs and run CAM software.
The integration of CAD with other components of CAD/CAM/CAE Product lifecycle management (PLM) environment requires an effective CAD data exchange. Usually it had been necessary to force the CAD operator to export the data in one of the common data formats, such as IGES or STL or Parasolid formats that are supported by a wide variety of software.
The output from the CAM software is usually a simple text file of G-code/M-codes, sometimes many thousands of commands long, that is then transferred to a machine tool using a direct numerical control (DNC) program or in modern Controllers using a common USB Storage Device. CAM packages could not, and still cannot, reason as a machinist can. They could not optimize toolpaths to the extent required of mass production. Users would select the type of tool, machining process and paths to be used.
While an engineer may have a working knowledge of G-code programming, small optimization and wear issues compound over time. Mass-produced items that require machining are often initially created through casting or some other non-machine method. This enables hand-written, short, and highly optimized G-code that could not be produced in a CAM package. At least in the United States, there is a shortage of young, skilled machinists entering the workforce able to perform at the extremes of manufacturing; high precision and mass production.
As CAM software and machines become more complicated, the skills required of a machinist or machine operator advance to approach that of a computer programmer and engineer rather than eliminating the CNC machinist from the workforce. Typical areas of concern High-Speed Machining, including streamlining of tool paths Multi-function Machining 5 Axis Machining Feature recognition and machining Automation of Machining processes Ease of Use
Overcoming historical shortcomings
Over time, the historical shortcomings of CAM are being attenuated, both by providers of niche solutions and by providers of high-end solutions.
This is occurring primarily in three arenas: Ease of usage Manufacturing complexity Integration with PLM and the extended enterprise Ease in use For the user who is just getting started as a CAM user, out-of-the-box capabilities providing Process Wizards, templates, libraries, machine tool kits, automated feature based machining and job function specific tailorable user interfaces build user confidence and speed the learning curve.
User confidence is further built on 3D visualization through a closer integration with the 3D CAD environment, including error-avoiding simulations and optimizations. Manufacturing complexity The manufacturing environment is increasingly complex. The need for CAM and PLM tools by the manufacturing engineer, NC programmer or machinist is similar to the need for computer assistance by the pilot of modern aircraft systems. The modern machinery cannot be properly used without this assistance.
Today's CAM systems support the full range of machine tools including: turning, 5 axis machining, waterjet, laser / plasma cutting, and wire EDM. Today’s CAM user can easily generate streamlined tool paths, optimized tool axis tilt for higher feed rates, better tool life and surface finish, and ideal cutting depth. In addition to programming cutting operations, modern CAM software can also drive non-cutting operations such as machine tool probing.
Integration with PLM and the extended enterprise LM to integrate manufacturing with enterprise operations from concept through field support of the finished product. To ensure ease of use appropriate to user objectives, modern CAM solutions are scalable from a stand-alone CAM system to a fully integrated multi-CAD 3D solution-set. These solutions are created to meet the full needs of manufacturing personnel including part planning, shop documentation, resource management and data management and exchange.
To prevent these solutions from detailed tool specific information a dedicated tool management
Software: large vendors
References
Further reading
https://patents.google.com/patent/US5933353A/en
External links
CADSite.ru CAD Models Cimatron Brazil about Software CAD/CAM CimatronE Dragomatz and Mann reviewed toolpath algorithms in 1997 Pocket Machining Based on Offset Curves by Martin Held Purdue University Purdue Research and Education Centre for Information Systems in Engineering How to evaluate a CAM system Sheetmetalworld.com article
Text derived from https://en.wikipedia.org/w/index.php?oldid=1367495240 under CC BY-SA 4.0; modifications have been made.