Lesson plan
Contamination delay
In digital circuits, the contamination delay (denoted as t cd ) is the minimum amount of time from when an input changes until any output starts to change its value. This change in value does not imply that the value has reached a stable condition. The contamination delay only specifies that the output rises (or falls) to 50% of the voltage level for a logic high. The circuit is guaranteed not to show any output change in response to an input change before t cd time units (calculated for the whole circuit) have passed. The determination of the contamination delay of a combined circuit requires identifying the shortest path of contamination delays from input to output and by adding each t cd time along this path. For a sequential circuit such as two D-flip flops connected in series, the contamination delay of the first flip-flop must be factored in to avoid violating the hold-time constraint of the second flip-flop receiving the output from the first flip flop. Here, the contamination delay is the amount of time needed for a change in the flip-flop clock input to result in the initial change at the flip-flop output (Q). If there is insufficient delay from the output of the first flip-flop to the input of the second, the input may change before the hold time has passed.…
Article summary
In digital circuits, the contamination delay (denoted as t cd ) is the minimum amount of time from when an input changes until any output starts to change its value. This change in value does not imply that the value has reached a stable condition. The contamination delay only specifies that the output rises (or falls) to 50% of the voltage level for a logic high. The circuit is guaranteed not to show any output change in response to an input change before t cd time units (calculated for the whole circuit) have passed. The determination of the contamination delay of a combined circuit requires identifying the shortest path of contamination delays from input to output and by adding each t cd time along this path. For a sequential circuit such as two D-flip flops connected in series, the contamination delay of the first flip-flop must be factored in to avoid violating the hold-time constraint of the second flip-flop receiving the output from the first flip flop. Here, the contamination delay is the amount of time needed for a change in the flip-flop clock input to result in the initial change at the flip-flop output (Q). If there is insufficient delay from the output of the first flip-flop to the input of the second, the input may change before the hold time has passed.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.