Continuous reactor

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Continuous reactors (alternatively referred to as flow reactors) carry chemical materials as a flowing stream. Reactants are continuously fed into the reactor and emerge as continuous stream of product. Continuous reactors are used for a wide variety of chemical and biological processes within the food, chemical and pharmaceutical industries. A survey of the continuous reactor market will throw up a daunting variety of shapes and types of machine. Beneath this variation however lies a relatively small number of key design features which determine the capabilities of the reactor. When classifying continuous reactors, it can be more helpful to look at these design features rather than the whole system.

Continuous reactors (alternatively referred to as flow reactors) carry chemical materials as a flowing stream. Reactants are continuously fed into the reactor and emerge as continuous stream of product. Continuous reactors are used for a wide variety of chemical and biological processes within the food, chemical and pharmaceutical industries. A survey of the continuous reactor market will throw up a daunting variety of shapes and types of machine. Beneath this variation however lies a relatively small number of key design features which determine the capabilities of the reactor. When classifying continuous reactors, it can be more helpful to look at these design features rather than the whole system.

Benefits of batch reactors

Batch reactors are very versatile and are used for a variety for different unit operations (batch distillation, storage, crystallisation, liquid-liquid extraction etc.) in addition to chemical reactions. There is a large installed base of batch reactors within industry and their method of use is well established. Batch reactors are excellent at handling difficult materials like slurries or products with a tendency to foul. Batch reactors represent an effective and economic solution for many types of slow reactions.

Benefits of continuous reactors

The rate of many chemical reactions is dependent on reactant concentration. Continuous reactors are generally able to cope with much higher reactant concentrations due to their superior heat transfer capacities. Plug flow reactors have the additional advantage of greater separation between reactants and products giving a better concentration profile. The small size of continuous reactors makes higher mixing rates possible. The output from a continuous reactor can be altered by varying the run time. This increases operating flexibility for manufacturers. q_x = UA(T_p-T_j) where: q x : the heat liberated or absorbed by the process (W) U: the heat transfer coefficient of the heat exchanger (W/(m 2 K)) A: the heat transfer area (m 2 ) T p : process temperature (K) T j : jacket temperature (K) From a reactor design perspective, heat transfer capacity is heavily influenced by channel size since this determines the heat transfer area per unit volume. Channel size can be categorised in various ways however in broadest terms, the categories are as follows: Industrial batch reactors: 1–10 m 2 /m 3 (depending on reactor capacity) Laboratory batch reactors: 10–100 m 2 /m 3 (depending on reactor capacity) Continuous reactors (non-micro): 100–5,000 m 2 /m 3 (depending on channel size) Micro reactors: 5,000–50,000 m 2 /m 3 (depending on channel size) Small diameter channels have the advantage of high heat transfer capacity. Against this however they have lower flow capacity, higher pressure drop and an increased tendency to block. In many cases, the physical structure and fabrication techniques for micro reactors make cleaning and unblocking very difficult to achieve. In a batch reactor, good temperature control is achieved when the heat added or removed by the heat exchange surface (qx) equals the heat generated or absorbed by the process material (qp). For flowing reactors made up of tubes or plates, satisfying the relationship qx = qp does not deliver good temperature control since the rate of process heat liberation/absorption varies at different points within the reactor. Controlling the outlet temperature does not prevent hot/cold spots within the reactor. Hot or cold spots caused by exothermic or endothermic activity can be eliminated by relocating the temperature sensor (T) to the point where the hot/cold spots exists. This however leads to overheating or overcooling downstream of the temperature sensor. File:Continuous reactor hot spot.png|Hot/cold spots are created when the reactor is treated as a single stage for temperature control File:Continuous reactor cold zone.png|Hot/cold spots can be eliminated by moving the temperature sensor. This however causes overcooling or overheating downstream of the temperature sensor. Many different types of plate or tube reactors use simple feed back control of the product temperature. From a user's perspective, this approach is only suitable for processes where the effects of hot/cold spots do not compromise safety, quality or yield.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1353956645 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001353956645 · captured 1778665953.0 · version history

Cite this page as: encyclopegia.org, “Continuous reactor”, snapshot enwiki-001353956645. https://encyclopegia.org/a/continuous-reactor

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.