Lesson plan

Control line

in flight Control line (also called U-Control) is a simple and light way of controlling a flying model aircraft. The aircraft is typically connected to the operator by a pair of lines, attached to a handle, that work the elevator of the model. This allows the model to be controlled in the pitch axis. It is constrained to fly on the surface of a hemisphere by the control lines. The control lines are usually either stranded stainless steel cable or solid metal wires of anywhere from to . Sewing thread or braided fishing line may be used instead of wires, but air resistance is greater. A third line is sometimes used to control the engine throttle, and more lines may be added to control other functions. Electrical signals sent over the wires are sometimes used in scale models to control functions such as retracting undercarriage and flaps. There is also a control system that uses a single solid wire, this is called Monoline. When the pilot twists the wire around its axis, a spiral inside the airplane spins to move the elevator. While it can be used with some success on any type of model, it is best for speed models where the reduced aerodynamic drag of the single line is a significant advantage. The control provided is not as precise as the two-line control system. Almost all control-line models are powered with conventional model aircraft engines of various types.…

Back to article

Article summary

in flight Control line (also called U-Control) is a simple and light way of controlling a flying model aircraft. The aircraft is typically connected to the operator by a pair of lines, attached to a handle, that work the elevator of the model. This allows the model to be controlled in the pitch axis. It is constrained to fly on the surface of a hemisphere by the control lines. The control lines are usually either stranded stainless steel cable or solid metal wires of anywhere from to . Sewing thread or braided fishing line may be used instead of wires, but air resistance is greater. A third line is sometimes used to control the engine throttle, and more lines may be added to control other functions. Electrical signals sent over the wires are sometimes used in scale models to control functions such as retracting undercarriage and flaps. There is also a control system that uses a single solid wire, this is called Monoline. When the pilot twists the wire around its axis, a spiral inside the airplane spins to move the elevator. While it can be used with some success on any type of model, it is best for speed models where the reduced aerodynamic drag of the single line is a significant advantage. The control provided is not as precise as the two-line control system. Almost all control-line models are powered with conventional model aircraft engines of various types.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.