Convection

.

Uses your system voice; voice and rate in settings.

≈ 6 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Hot areas are shown in red, cold areas are shown in blue. A hot, less-dense material at the bottom moves upwards, and likewise, cold material from the top moves downwards. Convection is the transfer of heat through the physical movement of fluids (liquids or gases), where warmer, less-dense material rises and cooler, denser material sinks.

It is a single-phase or multiphase fluid flow that occurs spontaneously through the combined effects of material property heterogeneity and body forces on a fluid. When the cause of the convection is unspecified, convection due to the effects of thermal expansion (change in density) and gravity/buoyancy can be assumed (see convection in heat transfer). .

The plume of hot air resulting from the convection current is visible. Convective flow may be transient (such as when a multiphase mixture of oil and water separates) or steady state (see convection cell). The convection may be due to gravitational, electromagnetic or fictitious body forces.

Heat transfer by natural convection plays a role in the structure of Earth's atmosphere, its oceans, and its mantle. Discrete convective cells in the atmosphere can be identified by clouds, with stronger convection resulting in thunderstorms. Natural convection also plays a role in stellar physics.

Convection is often categorised or described by the main effect causing the convective flow; for example, thermal convection. Convection may also take place in soft solids or mixtures where particles can flow. Convection cannot take place in most solids because neither bulk current flows nor significant diffusion of matter can take place.

Granular convection is a similar phenomenon in granular material instead of fluids. Advection is the transport of any substance or quantity (such as heat) through fluid motion. Convection is a process involving bulk movement of a fluid that usually leads to a net transfer of heat through advection.

Convective heat transfer is the intentional use of convection as a method for heat transfer. \textbf{Ra} = \frac{\Delta\rho g L^3}{D\mu} where \Delta \rho is the difference in density between the two parcels of material that are mixing g is the local gravitational acceleration L is the characteristic length-scale of convection: the depth of the boiling pot, for example D is the diffusivity of the characteristic that is causing the convection, and \mu is the dynamic viscosity. Natural convection will be more likely and/or more rapid with a greater variation in density between the two fluids, a larger acceleration due to gravity that drives the convection, and/or a larger distance through the convecting medium.

Convection will be less likely and/or less rapid with more rapid diffusion (thereby diffusing away the gradient that is causing the convection) and/or a more viscous (sticky) fluid. For thermal convection due to heating from below, as described in the boiling pot above, the equation is modified for thermal expansion and thermal diffusivity.

Density variations due to thermal expansion are given by: \Delta\rho=\rho_0 \beta \Delta T where \rho_0 is the reference density, typically picked to be the average density of the medium, \beta is the coefficient of thermal expansion, and \Delta T is the temperature difference across the medium. The general diffusivity, D , is redefined as a thermal diffusivity, \alpha .

D=\alpha Inserting these substitutions produces a Rayleigh number that can be used to predict thermal convection. \textbf{Ra} = \frac{\rho_0 g \beta \Delta T L^3}{\alpha \mu} Gr= \frac{g \beta \Delta T L^3}{\nu^2} In very sticky, viscous fluids (large ν), fluid motion is restricted, and natural convection will be non-turbulent. Following the treatment of the previous subsection, the typical fluid velocity is of the order of g \Delta \rho L^2 / \mu , up to a numerical factor depending on the geometry of the system.

Therefore, Grashof number can be thought of as Reynolds number with the velocity of natural convection replacing the velocity in Reynolds number's formula. However In practice, when referring to the Reynolds number, it is understood that one is considering forced convection, and the velocity is taken as the velocity dictated by external constraints (see below).

Gr= \frac{g \beta \Delta C L^3}{\nu^2} Natural convection is highly dependent on the geometry of the hot surface, various correlations exist in order to determine the heat transfer coefficient. It is expressed as the Nusselt number (Nu), which is a rescaling of the heat transfer coefficient.

A general correlation that applies for a variety of geometries is Nu = \left[Nu_0^\frac{1}{2} + Ra^ \frac{1}{6} \left(\frac {f_4\left(Pr\right)}{300}\right)^\frac{1}{6} \right]^2 The value of f 4 (Pr) is calculated using the following formula f_4(Pr)= \left[1+ \left ( \frac {0.5}{Pr} \right )^\frac{9}{16} \right]^\frac{-16}{9} Nu m = 0.478(Gr 0.25 ) Mean Nusselt number = Nu m = h m L/k where h m = mean coefficient applicable between the lower edge of the plate and any point in a distance L (W/m 2 . K) L = height of the vertical surface (m) k = thermal conductivity (W/m. K) Grashof number = Gr = [gL^3(t_s-t_\infty)]/v^2T where g = gravitational acceleration (m/s 2 ) L = distance above the lower edge (m) t s = temperature of the wall (K) t∞ = fluid temperature outside the thermal boundary layer (K) v = kinematic viscosity of the fluid (m 2 /s) T = absolute temperature (K) When the flow is turbulent different correlations involving the Rayleigh Number (a function of both the Grashof number and the Prandtl number) must be used.

Note that the above equation differs from the usual expression for Grashof number because the value \beta has been replaced by its approximation 1/T , which applies for ideal gases only (a reasonable approximation for air at ambient pressure).

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372226643 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001372226643 · captured 2026-08-30 · ledger · version history

Cite this page as: encyclopegia.org, “Convection”, snapshot enwiki-001372226643. https://encyclopegia.org/a/convection

Sources cited in this revision

23 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.