Lesson plan

Cooling flow

A cooling flow occurs when the intracluster medium (ICM) in the centres of galaxy clusters should be rapidly cooling at the rate of tens to thousands of solar masses per year. This should happen as the ICM (a plasma) is quickly losing its energy by the emission of X-rays. The X-ray brightness of the ICM is proportional to the square of its density, which rises steeply towards the centres of many clusters. Also the temperature falls to typically a third or a half of the temperature in the outskirts of the cluster. The typical [predicted] timescale for the ICM to cool is relatively short, less than a billion years. As material in the centre of the cluster cools out, the pressure of the overlying ICM should cause more material to flow inwards (the cooling flow). In a steady state, the rate of mass deposition, i.e. the rate at which the plasma cools, is given by : \dot{M} = \frac{2}{5} \frac{L \mu m}{kT}, where L is the bolometric (i.e. over the entire spectrum) luminosity of the cooling region, T is its temperature, k is the Boltzmann constant and μm is the mean molecular mass.

Back to article

Article summary

A cooling flow occurs when the intracluster medium (ICM) in the centres of galaxy clusters should be rapidly cooling at the rate of tens to thousands of solar masses per year. This should happen as the ICM (a plasma) is quickly losing its energy by the emission of X-rays. The X-ray brightness of the ICM is proportional to the square of its density, which rises steeply towards the centres of many clusters. Also the temperature falls to typically a third or a half of the temperature in the outskirts of the cluster. The typical [predicted] timescale for the ICM to cool is relatively short, less than a billion years. As material in the centre of the cluster cools out, the pressure of the overlying ICM should cause more material to flow inwards (the cooling flow). In a steady state, the rate of mass deposition, i.e. the rate at which the plasma cools, is given by : \dot{M} = \frac{2}{5} \frac{L \mu m}{kT}, where L is the bolometric (i.e. over the entire spectrum) luminosity of the cooling region, T is its temperature, k is the Boltzmann constant and μm is the mean molecular mass.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.