Lesson plan

Creo Parametric

Creo Parametric, formerly known, together with Creo Elements/Pro, as Pro/Engineer (commonly referred to as Pro E) and Wildfire, is a solid modeling or computer-aided design (CAD), computer-aided manufacturing (CAM), computer-aided engineering (CAE), and associative 3D modeling application, that runs on Microsoft Windows. Creo Parametric should not be confused with Creo Elements/Direct Modeling, formerly CoCreate ME10 (2D) and or ME30 (3D) CAD Products. The ex-CoCreate CAD Products are now owned by PTC and renamed Creo Elements/Direct Drafting and Creo Elements/Direct Modeling. Creo Parametric is an application of a suite of 10 that provide collaborative solid modeling, assembly modelling, 2D orthographic views, finite element analysis, parametric modelling, sub-divisional and non-uniform rational B-spline (NURBS) surface modeling, technical drawing (drafting), and numerical control (NC) and tooling functionality for mechanical designers. Creo Parametric competes directly with CATIA, SolidWorks, NX/Solid Edge, Inventor/Fusion, IRONCAD, and Onshape. It was created by Parametric Technology Corporation (PTC) and was the first of its kind to market. The software uses a specific file naming scheme, not allowing certain characters like ä, ö, é, ő, ł, Đ, ... (including spaces).

Back to article

Article summary

Creo Parametric, formerly known, together with Creo Elements/Pro, as Pro/Engineer (commonly referred to as Pro E) and Wildfire, is a solid modeling or computer-aided design (CAD), computer-aided manufacturing (CAM), computer-aided engineering (CAE), and associative 3D modeling application, that runs on Microsoft Windows. Creo Parametric should not be confused with Creo Elements/Direct Modeling, formerly CoCreate ME10 (2D) and or ME30 (3D) CAD Products. The ex-CoCreate CAD Products are now owned by PTC and renamed Creo Elements/Direct Drafting and Creo Elements/Direct Modeling. Creo Parametric is an application of a suite of 10 that provide collaborative solid modeling, assembly modelling, 2D orthographic views, finite element analysis, parametric modelling, sub-divisional and non-uniform rational B-spline (NURBS) surface modeling, technical drawing (drafting), and numerical control (NC) and tooling functionality for mechanical designers. Creo Parametric competes directly with CATIA, SolidWorks, NX/Solid Edge, Inventor/Fusion, IRONCAD, and Onshape. It was created by Parametric Technology Corporation (PTC) and was the first of its kind to market. The software uses a specific file naming scheme, not allowing certain characters like ä, ö, é, ő, ł, Đ, ... (including spaces).

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.