cricket bat
in cricket, a blade with a handle used by batsmen to hit the ball
≈ 10 min read
Names in other languages
- Françaisbatte de cricket
- cabat de criquet
- etKriketikurikas
- PolskiKij krykietowy
- Englishcricket bat
- 简体中文板球球棒
- 繁體中文板球球棒
- 中文木球球棒
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A cricket bat is a specialised piece of equipment used by batters in the sport of cricket to hit the ball, typically consisting of a cane handle attached to a flat-fronted willow-wood blade. It may also be used by a batter who is making batter's ground to avoid a run out, by holding the bat and touching the ground with it.
The length of the bat may be no more than 38 inches (96.5 cm) and the width no more than 4.25 inches (10.8 cm). Its use is first mentioned in 1624. Since 1979, a law change has dictated that cricket bats can only be made from wood.
A cricket bat is a specialised piece of equipment used by batters in the sport of cricket to hit the ball, typically consisting of a cane handle attached to a flat-fronted willow-wood blade. It may also be used by a batter who is making batter's ground to avoid a run out, by holding the bat and touching the ground with it.
The length of the bat may be no more than 38 inches (96.5 cm) and the width no more than 4.25 inches (10.8 cm). Its use is first mentioned in 1624. Since 1979, a law change has dictated that cricket bats can only be made from wood.
Construction
The blade of a cricket bat is a wooden block that is generally flat on the striking face and with a ridge on the reverse (back) which concentrates wood in the middle where the ball is generally hit. The bat is traditionally made from willow wood, specifically from a variety of white willow called cricket bat willow (Salix alba var. caerulea), treated with raw (unboiled) linseed oil, which has a protective function.
This variety of willow is used as it is very tough and shock-resistant, not being significantly dented nor splintering on the impact of a cricket ball at high speed, while also being light in weight. The face of the bat is often covered with a protective film by the user. In 1900 Percy Stuart Surridge developed a reinforced toe.
The blade is connected to a long cylindrical cane handle, similar to that of a mid-20th-century tennis racquet, using a splice. The handle is usually covered with a rubber grip. Bats incorporate a wooden spring design where the handle meets the blade.
The current design of a cane handle spliced into a willow blade through a tapered splice was the invention in the 1880s of Charles Richardson, a pupil of Brunel and the first Chief Engineer of the Severn Railway Tunnel. Spliced handles had been used before this but tended to break at the corner of the join.
The taper provides a more gradual transfer of load from the bat's blade to the handle and avoids this problem. The edges of the blade closest to the handle are known as the shoulders of the bat, and the bottom of the blade is known as the toe of the bat. Bats were not always this shape.
Before the 18th century, bats tended to be shaped similarly to modern hockey sticks. This may well have been a legacy of the game's reputed origins. Although the first forms of cricket are obscure, it may be that the game was first played using shepherd's crooks.
The bat generally recognised as the oldest bat still in existence is dated 1729 and is on display in the Sandham Room at The Oval in London.
Maintenance
, Bengaluru (2026) When first purchased, most bats are not ready for immediate use and require knocking-in to allow the soft fibres to strike a hard new cricket ball without causing damage to the bat, and allowing full power to be transferred to the shot. Knocking-in involves striking the surface with an old cricket ball or a special mallet.
This compacts the soft fibres within the bat and reduces the risk of the bat snapping. The bat may also need raw linseed oil, which fills in the gaps between the fibres. Raw linseed oil is used, rather than boiled linseed oil, as the raw form is also a drying oil but very slow "drying", and so the surface remains tacky.
Applied regularly, this has a protective effect on the wood and makes it less sensitive to humidity changes in the atmosphere, which could cause warping or splitting. Another important factor is that it increases the surface friction of the ball to the bat surface, giving better control of the shot. A worn surface can be noticed by the player, indicating that re-oiling is needed.
Twenty20 bats
In 2004, Newbery created the Uzi, with a truncated blade and elongated handle for the new Twenty20 format of the game. This change allowed more wood to be placed in the middle, as more attacking shots are played in the shorter version of the game. In 2009, an extreme version of the Newbery Uzi shape named the Mi3 was launched by Mongoose.
The design is unusual in that the blade is 33% shorter than a conventional bat and the handle is 43% longer. Launched with a fanfare of publicity, it proclaimed the idea of not defending the ball in the T20 format and purely playing attacking shots. On 11 March 2010, Mongoose launched its range in India with the announcement of Matthew Hayden as the brand ambassador.
Stuart Law, the former Australian Test player, called it "a half-brick on a stick". The bat was used by Hayden in the 2010 version of the IPL. Gareth Andrew, the Worcestershire all-rounder, scored his maiden 100 with an MMi3 in professional cricket when he hit 100 off 58 balls at the Oval in 2010 against Surrey.
In 2008, Lekka Cricket launched a T20 format bat, the Big Hitter. Black Cat Cricket then launched a T20 format bat, the Joker, in 2009. These worked on a similar principle to other T20 bats with the blade length reduced by one inch and an inch longer handle, but uniquely reduced the width of the bat to 4 inches in an adult bat.
Manufacturing
Modern bats are usually hand-made in the Indian sub-continent (India or Pakistan) due to the low cost of labour. However a few specialists in England, Australia, and New Zealand still make bats, mostly with use of a CNC lathe.
Cricket bat industry of India
Traditional Indian cricket bats are made in the regions of Jammu and Kashmir, Punjab, Haryana, Gujarat, Uttar Pradesh and Rajasthan. In Kashmir they are made out of willow found in northern India. Some bats made in Kashmir are of international standards and are/were used by national players in India Sunil Gavaskar, Virender Sehwag and Yuvraj Singh.
Kashmir willow bats
The willow used in making bats in Kashmir was brought in by the British, who ruled India, during the 1820s. The industry combines traditional tools with modern technology. Some of the districts where these bats are made in Kashmir are Anantnag, Baramula, and Pahalgam. The species is identical (Salix alba var. caerulea) to English willow.
Kashmir willow bats play well and no evidence has been presented that the wood or finished product has different properties or plays any differently. However, Kashmir willow bats sell for significantly lower prices than English willow, on the belief that the English willow bats are superior.
Kashmir willow bats are widespread in social and amateur competitions, although English willow is seen as a more "serious" cricketer's bat. Much of the English Willow cricket bat market consists of bats that are made in India from imported English willow blanks. It would be virtually impossible to detect "counterfeit" English willow bats made from Kashmir willow.
The marketing of English willow bats is, therefore, a trust exercise between the buyer and the brand, that the brand has not inflated their supply of "English willow" bats by sourcing blanks from India as well as England. This risk of substitution is a major hurdle for small brands looking to get bats manufactured in India.
Resources are needed to ensure the integrity and custody of the English willow at all stages of production. English willow bats with minor visual defects such as grains that are not perfectly straight, or discolourations, are also cheaper.
Former England captain Geoffrey Boycott has stated that such bats will play just as well as better-looking ones and that players ought to buy the cheaper ones to get the same performance at a better price. It is unlikely that any difference in performance can be noted by most players from imperfections unless they are severe.
Provided the willow has been handled and prepared competently after felling and during the bat's creation, the much more important factor is the pickup (or weight distribution) of the bat, and its suitability to the player's style. Different shaping techniques create a higher or lower centre of balance, and different "sweet spot" sizes and locations.
One issue presented as the case against Kashmir willow is the warmer growing region. The timber is said to be firmer, with less spring. However, this is a common issue for English willow bats, too.
Due to the shortage of stock and demand for English willow, many small plantations on private property have been established in ideal conditions, with trees maturing as young as 10 to 12 years. This has meant a much wider grain in the wood, sometimes leading to bats with as few as 6 or even 4 grains.
Bats with 8 or fewer grains are held to be harder and take longer to play well, but also to last longer. Bats with 16 or more grains are held to be softer and more playable immediately but with a reduced lifespan. 8 to 12 grains is commonly the desirable range.
Australia is another country growing Salix alba var. caerulea for cricket bats, with the entire Australian stock descended from staves sent to Australia in the 1930s from the then-England captain to his Australian counterpart. Australia grew its willow for decades until Slazenger bought the company which owned most of the plantations.
Slazenger's only interest was in apparel and the plantations were mostly sold and destroyed. In the 1990s a project was launched to again commercially grow cricket bat willow. There are now plantations in Victoria and New South Wales, but not Queensland, where all forms of willow cultivation are banned.
Giant bats
Several organisations have made giant cricket bats and claimed them as the largest bat in the world. According to the Laws of Cricket, a bat can have a maximum width of 4.25 inches (108 mm), so these bats cannot be used in an official game. , Guinness World Records state that the largest bat is long and was made by Classic Mall Development Company in Chennai, India.
Other giant bats include: A synthetic cricket bat high and wide is installed at Indira Gandhi Stadium in Vijayawada, India. LEMU Soft Drinks in Bangladesh created a long and wide bat to wish the Bangladesh cricket team good luck in the 2007 Cricket World Cup.
LG Electronics presented a long, wide, deep bat to the South Africa national cricket team at their final warmup game prior to the 2003 Cricket World Cup. LG's press release shows this bat is the largest ever constructed. The Pasban Giant Cricket Bat was unveiled at Defense Stadium, Karachi, Pakistan in the lead up to the 1996 Cricket World Cup.
The bat is in length.
See also
Cricket clothing and equipment
Text derived from https://en.wikipedia.org/w/index.php?oldid=1374902042 under CC BY-SA 4.0; modifications have been made.