Critical radius

Uses your system voice; voice and rate in settings.

Snapshot

≈ 7 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Critical radius is the minimum particle size from which an aggregate is thermodynamically stable. In other words, it is the lowest radius formed by atoms or molecules clustering together (in a gas, liquid or solid matrix) before a new phase inclusion (a bubble, a droplet or a solid particle) is viable and begins to grow. Formation of such stable nuclei is called nucleation. At the beginning of the nucleation process, the system finds itself in an initial phase. Afterwards, the formation of aggregates or clusters from the new phase occurs gradually and randomly at the nanoscale. Subsequently, if the process is feasible, the nucleus is formed. Notice that the formation of aggregates is conceivable under specific conditions. When these conditions are not satisfied, a rapid creation-annihilation of aggregates takes place and the nucleation and posterior crystal growth process does not happen. In precipitation models, nucleation is generally a prelude to models of the crystal growth process. Sometimes precipitation is rate-limited by the nucleation process. An example would be when someone takes a cup of superheated water from a microwave and, when jiggling it with a spoon or against the wall of the cup, heterogeneous nucleation occurs and most of water particles convert into steam.…

Critical radius is the minimum particle size from which an aggregate is thermodynamically stable. In other words, it is the lowest radius formed by atoms or molecules clustering together (in a gas, liquid or solid matrix) before a new phase inclusion (a bubble, a droplet or a solid particle) is viable and begins to grow. Formation of such stable nuclei is called nucleation. At the beginning of the nucleation process, the system finds itself in an initial phase. Afterwards, the formation of aggregates or clusters from the new phase occurs gradually and randomly at the nanoscale. Subsequently, if the process is feasible, the nucleus is formed. Notice that the formation of aggregates is conceivable under specific conditions. When these conditions are not satisfied, a rapid creation-annihilation of aggregates takes place and the nucleation and posterior crystal growth process does not happen. In precipitation models, nucleation is generally a prelude to models of the crystal growth process. Sometimes precipitation is rate-limited by the nucleation process. An example would be when someone takes a cup of superheated water from a microwave and, when jiggling it with a spoon or against the wall of the cup, heterogeneous nucleation occurs and most of water particles convert into steam. If the change in phase forms a crystalline solid in a liquid matrix, the atoms might then form a dendrite. The crystal growth continues in three dimensions, the atoms attaching themselves in certain preferred directions, usually along the axes of a crystal, forming a characteristic tree-like structure of a dendrite. \Delta G_T = \Delta G_V + \Delta G_S It has two components, the volume energy \Delta G_V and the surface energy \Delta G_S . The first one describes how probable it is to have a phase change and the second one is the amount of energy needed to create an interface. The mathematical expression of \Delta G_V , considering spherical particles, is given by: \Delta G_V = \frac{4}{3}\pi r^3 \Delta g_v where \Delta g_v is the Gibbs free energy per volume and obeys -\infty . It is defined as the energy difference between one system at a certain temperature and the same system at the fusion temperature and it depends on pressure, the number of particles and temperature: \Delta g_v (T,p,N) . For a low temperature, far from the fusion point, this energy is big (it is more difficult to change the phase) and for a temperature close to the fusion point it is small (the system will tend to change its phase). Regarding \Delta G_S and considering spherical particles, its mathematical expression is given by: without being redissolved. Above the critical radius, the particles will form and grow as it is thermodynamically favourable.]] \Delta G_S = 4\pi r^2 \gamma > 0 where \gamma is the surface tension we need to break to create a nucleus. The value of the \Delta G_S is never negative as it always takes energy to create an interface. The total Gibbs free energy is therefore: \Delta G_T=-\frac{4 \pi}{3} r^3 \Delta g_v + 4 \pi r^2 \gamma The critical radius r_c is found by optimization, setting the derivative of \Delta G_T equal to zero. \frac{d\Delta G_T}{dr}=-4\pi r_c^2 \Delta g_v+ 8 \pi r_c \gamma = 0 yielding r_c = \frac{2\gamma} , where \gamma is the surface tension and |\Delta g_v| is the absolute value of the Gibbs free energy per volume. The Gibbs free energy of nuclear formation is found replacing the critical radius expression in the general formula. \Delta G_c = \frac{16\pi\gamma^3}{3(\Delta g_v)^2} Supercooling is a phenomenon in which the system's temperature is lowered under the phase transition temperature without the creation of the new phase. Let \Delta T = T_f - T be the temperature difference, where T_f is the phase transition temperature. Let \Delta g_v = \Delta h_v - T \Delta s_v be the volume Gibbs free energy, enthalpy and entropy respectively. When T = T_f , the system has null Gibbs free energy, so: \Delta g_{f,v} = 0 \Leftrightarrow \Delta h_{f,v} = T_f \Delta s_{f,v} In general, the following approximations can be done: \Delta h_v \rightarrow \Delta h_{f,v} and \Delta s_v \rightarrow \Delta s_{f,v} Consequently: \Delta g_v \simeq \Delta h_{f,v} - T\Delta s_{f,v} = \Delta h_{f,v} - \frac{T\Delta h_{f,v}}{T_f} = \Delta h_{f,v} \frac{T_f - T}{T_f} So: \Delta g_v = \Delta h_{f,v} \frac{\Delta T}{T_f} Substituting this result on the expressions for r_c and \Delta G_c , the following equations are obtained: r_c = \frac{2 \gamma T_f}{\Delta h_{f,v}} \frac{1}{\Delta T} \Delta G_c = \frac{16 \pi \gamma ^3 T_f^2}{3 (\Delta h_{f,v})^2} \frac{1}{(\Delta T)^2} Notice that r_c and \Delta G_c diminish with an increasing supercooling. Analogously, a mathematical derivation for the superheating can be done. From the definition of chemical potential \Delta \mu = - k_B T ln \left(\frac{c_0}{c_{eq}}\right) , where k_B is the Boltzmann constant, c_0 is the solute concentration and c_{eq} is the equilibrium concentration. For a stoichiometric compound and considering \mu = \frac{\partial G}{\partial N} and N = \frac{V}{v_a} , where v_a is the atomic volume: \Delta g_v =\frac{\Delta \mu}{v_a} = - \frac{k_B T}{v_a} ln \left(\frac{c_0}{c_{eq}}\right). Defining the supersaturation as S=\frac{c_0-c_{eq}}{c_{eq}}, this can be rewritten as \Delta g_v = - \frac{k_B T}{v_a} ln \left(1+S\right). Finally, the critical radius r_c and the Gibbs free energy of nuclear formation \Delta G_c can be obtained as r_c = \frac{2\gamma v_a}{k_B T ln \left(1+S\right)} , \Delta G_c = \frac{16 \pi \gamma^3 V_M^2}{3 (RT ln \left(1+S\right))^2}, where V_M is the molar volume and R is the molar gas constant.

See also

Nucleation Ostwald ripening Supercooling Superheating

References

N.H.Fletcher, Size Effect in Heterogeneous Nucleation, J.Chem.Phys.29, 1958, 572. Nguyen T. K. Thanh,* N. Maclean, and S. Mahiddine, Mechanisms of Nucleation and Growth of Nanoparticles in Solution, Chem. Rev. 2014, 114, 15, 7610-7630.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1277312647 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001277312647 · captured 1740347557.0 · version history

Cite this page as: encyclopegia.org, “Critical radius”, snapshot enwiki-001277312647. https://encyclopegia.org/a/critical-radius

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.