Lesson plan
Csakan
The csakan is a type of woodwind instrument that was popular in Austria-Hungary in the 19th century. A type of duct flute, the csakan was originally a recorder crafted in the shape of a walking stick with a mouthpiece in the handle, reflecting the design of Hungarian war hammers which had been converted into flutes. From the 1820s, a new design appeared, which was in the shape of an oboe or clarinet. The csakan is a transposing instrument in A-flat although it could also be considered a transposing instrument in A when used with guitars which were almost always tuned a semitone down when accompanying the csakan. Modern manufacturers refer to it as "the Romantic recorder". Octaving is achieved on the csakan in the same manner as the recorder, that is by partially opening the thumb hole to allow it to act as a register vent. However, csakans were sometimes equipped with a removable bushing for the thumbhole which would create the correct opening size with the thumb removed from the hole. This necessitates the use of overblown fingerings for C 5 and D 5 which would otherwise be produced from the thumb hole.
Article summary
The csakan is a type of woodwind instrument that was popular in Austria-Hungary in the 19th century. A type of duct flute, the csakan was originally a recorder crafted in the shape of a walking stick with a mouthpiece in the handle, reflecting the design of Hungarian war hammers which had been converted into flutes. From the 1820s, a new design appeared, which was in the shape of an oboe or clarinet. The csakan is a transposing instrument in A-flat although it could also be considered a transposing instrument in A when used with guitars which were almost always tuned a semitone down when accompanying the csakan. Modern manufacturers refer to it as "the Romantic recorder". Octaving is achieved on the csakan in the same manner as the recorder, that is by partially opening the thumb hole to allow it to act as a register vent. However, csakans were sometimes equipped with a removable bushing for the thumbhole which would create the correct opening size with the thumb removed from the hole. This necessitates the use of overblown fingerings for C 5 and D 5 which would otherwise be produced from the thumb hole.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.