Lesson plan
CT1
CT1 (Cordless telephone generation 1) was the first-generation analog cordless telephone standard that was developed by the European Conference of Postal and Telecommunications Administrations (CEPT) in 1984 and used primarily in Europe. The standard defined the technical and operational characteristics for cordless telephones, allowing a wireless handset to communicate with a base station that is connected to the public telephone network. The original frequency allocation included 40 duplex channels using 25 kHz separation, with handsets transmitting in the 914-915 MHz band and base stations transmitting n the 959-960 MHz band. These frequencies overlap with those used by channels 120-124 on GSM cellular phones and thus these original frequencies have been withdrawn from use for cordless phones in the countries that originally authorized them. CT1+ provided in 1987 for a set of 80 additional channels using the same technical standard with 885–887 MHz used by the phones and 930–932 MHz used by the base stations. The introduction of CT1+ was driven by the increasing demand for cordless telephone channels, as the original 40 channels proved insufficient to support the growing number of users without severe interference problems when multiple handsets operated in the same area. While not part of the original GSM-900 band, the frequencies do overlap with the extended GSM-900 band.…
Article summary
CT1 (Cordless telephone generation 1) was the first-generation analog cordless telephone standard that was developed by the European Conference of Postal and Telecommunications Administrations (CEPT) in 1984 and used primarily in Europe. The standard defined the technical and operational characteristics for cordless telephones, allowing a wireless handset to communicate with a base station that is connected to the public telephone network. The original frequency allocation included 40 duplex channels using 25 kHz separation, with handsets transmitting in the 914-915 MHz band and base stations transmitting n the 959-960 MHz band. These frequencies overlap with those used by channels 120-124 on GSM cellular phones and thus these original frequencies have been withdrawn from use for cordless phones in the countries that originally authorized them. CT1+ provided in 1987 for a set of 80 additional channels using the same technical standard with 885–887 MHz used by the phones and 930–932 MHz used by the base stations. The introduction of CT1+ was driven by the increasing demand for cordless telephone channels, as the original 40 channels proved insufficient to support the growing number of users without severe interference problems when multiple handsets operated in the same area. While not part of the original GSM-900 band, the frequencies do overlap with the extended GSM-900 band.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.