Culverin
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A culverin was initially an ancestor of the hand-held arquebus, but the term was later used to describe a type of medieval and Renaissance cannon. The word is derived from the antiquated "culuering" and the French (from "grass snake", following ). From its origin as a hand-held weapon it was adapted for use as artillery by the French in the 15th century and for naval use by the English in the 16th century. The culverin as an artillery piece had a long smoothbore gun barrel with a relatively long range and flat trajectory, using solid round shot projectiles with high muzzle velocity.
A culverin was initially an ancestor of the hand-held arquebus, but the term was later used to describe a type of medieval and Renaissance cannon. The word is derived from the antiquated "culuering" and the French (from "grass snake", following ). From its origin as a hand-held weapon it was adapted for use as artillery by the French in the 15th century and for naval use by the English in the 16th century. The culverin as an artillery piece had a long smoothbore gun barrel with a relatively long range and flat trajectory, using solid round shot projectiles with high muzzle velocity. File:HandBombardWesternEurope1390-1400.jpg|"Hand bombard", or early culverin, 1390–1400 File:HandCulverinWithSmallCannonsEurope15thCentury.jpg|Hand culverin (middle) with two small cannons, Europe, 15th century File:EarlyCoulevrines.jpg|Early culverins (15th century): a hand culverin (top), and a culverin with removable chamber (bottom) File:40KgWroughtIronMurderer1410France.jpg|"Murderer", France, 1410 File:Culverin with side flash-pans.jpg|Culverin with side flash-pans File:Early culverin and hand culverin with bent stock.jpg|Above: Early culverin, below: Hand culverin with bent stock
Field culverins
Three types of culverin artillery pieces were used, distinguished by their size: the "culverin extraordinary", the "ordinary", and the "least-sized". There were also smaller versions, including the "bastard culverin" ( ), shot and the "demi-culverin" or "culverin-moyen" ( ), shot. Overall, the culverin was a significant advance over earlier cannons. Since it fired iron round shot instead of stone projectiles and had a longer barrel to enable the gunpowder to fully burn and impart more force to the projectile, the culverin could fire the denser projectile to a relatively greater range and with a flatter trajectory. A replica culverin extraordinary has achieved a muzzle velocity of , and a range over using only minimal elevation. This velocity and mass imply that the cannonball had a kinetic energy of roughly when leaving the muzzle. In Britain, Brigadier General Michael Richards was appointed Master-General of the Ordnance in 1714 and he commissioned a Danish expert, Albert Borgard, to design a new artillery system. Borgard did away with the traditional nomenclature of culverins, sakers and minions, and devised a new system based on the weight of shot that each gun used, from 4 to 64 pounds. Although Borgard's gun designs were quickly superseded, the practice of naming ordnance by weight of shot persisted in Britain into the 20th century. Bronze Demi Cannon Culverins Pmoth.png|Bronze culverins and demi-cannon, on display at the Mary Rose Museum, Portsmouth (Venice) 120 - Pounder culverin with the muzzle cut 16th century.jpg|Pounder culverin with the muzzle cut 16th century - Museo Storico Navale.
See also
Arquebus Demi-culverin Doglock Flintlock Hand cannon Matchlock Miquelet lock Musket Pistol Snaphance Snaplock Wheellock
Text derived from https://en.wikipedia.org/w/index.php?oldid=1368026939 under CC BY-SA 4.0; modifications have been made.