Lesson plan

Cutting balloon

A cutting balloon is an angioplasty device invented by Barath et al. used in percutaneous coronary interventions. It has a special balloon tip with small blades, that are activated when the balloon is inflated. This procedure is different from Rotoblation (Percutaneous Transluminal Rotational Atherectomy or PCRA) whereby a diamond tipped device spins at high revolutions to cut away calcific (chalky) atheroma usually prior to coronary stenting. Boston Scientific's Flextome is the most widely used cutting balloon. Cutting balloons have also been used in the treatment of refractory or recurrent laryngotracheal stenosis, particularly in cases where a dense ring of circumferential fibrosis has formed in the trachea or either bronchus'.

Back to article

Article summary

A cutting balloon is an angioplasty device invented by Barath et al. used in percutaneous coronary interventions. It has a special balloon tip with small blades, that are activated when the balloon is inflated. This procedure is different from Rotoblation (Percutaneous Transluminal Rotational Atherectomy or PCRA) whereby a diamond tipped device spins at high revolutions to cut away calcific (chalky) atheroma usually prior to coronary stenting. Boston Scientific's Flextome is the most widely used cutting balloon. Cutting balloons have also been used in the treatment of refractory or recurrent laryngotracheal stenosis, particularly in cases where a dense ring of circumferential fibrosis has formed in the trachea or either bronchus'.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.