Cutting mill

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Cutter mills are mills commonly used in laboratories for the preliminary size reduction of soft, medium-hard, fibrous and tough materials. A rotor inside the mill revolves at high speed. The rotor is equipped with special cutting plates which comminute the sample material. Different rotor geometries make mills adaptable to different material properties (medium-hard, soft, fibrous or elastic materials). Such mills are suitable for reducing rubber, leather, plastics, grains, dried meat, bones, vegetation and other substances. In elemental analysis, cutting mills should be used with care, since they can contaminate finely-reduced samples with metals from the blades and screens.

Cutter mills are mills commonly used in laboratories for the preliminary size reduction of soft, medium-hard, fibrous and tough materials. A rotor inside the mill revolves at high speed. The rotor is equipped with special cutting plates which comminute the sample material. Different rotor geometries make mills adaptable to different material properties (medium-hard, soft, fibrous or elastic materials). Such mills are suitable for reducing rubber, leather, plastics, grains, dried meat, bones, vegetation and other substances. In elemental analysis, cutting mills should be used with care, since they can contaminate finely-reduced samples with metals from the blades and screens.

See also

Wiley mill

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1267144934 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

6 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.