Lesson plan
Cutting tool material
Cutting tool materials are materials that are used to make cutting tools which are used in machining (drill bits, tool bits, milling cutters, etc.) but not other cutting tools like knives or punches. Cutting tool materials must be harder than the material of the workpiece, even at high temperatures during the process. The following properties are required for cutting tool materials: *hardness, hot hardness and pressure resistance *bending strength and toughness *inner bonding strength *wear resistance **oxidation resistance **small propensity for diffusion and adhesion **abrasion resistance **edge strength There is no material that shows all of these properties at the same time. Very hard materials, have lower toughness and break more easily. The following cutting tool materials are used: *Tool steels: They are relatively cheap and tough. Their hardness is sufficient to machine other steels. **Carbon tool steels: They lose their hardness at 200 °C **High speed steels: They lose their hardness at 600 °C, and are widely used in machining. Due to their ability to retain hardness at higher temperature, higher cutting speeds are possible. *Cemented carbides: Harder than tool steels, but less tough. Can be used up to 900 °C. There are many sort of cemented carbides like ones made of tungsten carbide and cobalt or cermets.…
Article summary
Cutting tool materials are materials that are used to make cutting tools which are used in machining (drill bits, tool bits, milling cutters, etc.) but not other cutting tools like knives or punches. Cutting tool materials must be harder than the material of the workpiece, even at high temperatures during the process. The following properties are required for cutting tool materials: *hardness, hot hardness and pressure resistance *bending strength and toughness *inner bonding strength *wear resistance **oxidation resistance **small propensity for diffusion and adhesion **abrasion resistance **edge strength There is no material that shows all of these properties at the same time. Very hard materials, have lower toughness and break more easily. The following cutting tool materials are used: *Tool steels: They are relatively cheap and tough. Their hardness is sufficient to machine other steels. **Carbon tool steels: They lose their hardness at 200 °C **High speed steels: They lose their hardness at 600 °C, and are widely used in machining. Due to their ability to retain hardness at higher temperature, higher cutting speeds are possible. *Cemented carbides: Harder than tool steels, but less tough. Can be used up to 900 °C. There are many sort of cemented carbides like ones made of tungsten carbide and cobalt or cermets.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.